|
Facilità d'uso
IMPORTANT: Save these instructions for the local electrical inspector’s use. INSTALLER: Please leave these Installation Instructions with this unit for the owner. OWNER: Please retain these instructions for future reference. ATTENTION PROPANE USERS: DO NOT ATTEMPT TO CONNECT THIS RANGE TO PROPANE USING THE NATURAL GAS CONNECTION DESCRIBED IN THIS MANUAL Please see the “LP Conversion Instructions” included in this literature kit to convert this range for propane use. BOSCH A IMPORTANT SAFETY INSTRUCTIONS Please read all instructions before using this appliance. /-N Table of Contents Safety Instructions and Applicable Codes...........................................................................1, 2 Install Ventilation, Prepare Cabinets and Install Anti-Tip Bracket...............................................3 Connect Electric...............................................................................................................4, 5 Connect Gas.......................................................................................................................6 Test the Installation.............................................................................................................7 V_/ • Remove all tape and packaging before using the range. Destroy the carton and plastic bags after unpacking the range. Never allow children to play with packaging material. Install only per these installation instructions. Ask your dealer to recommend a qualified technician and an authorized repair service. Know how to disconnect the power to the range at the circuit breaker or fuse box in and the gas supply at the shutoff in case of an emergency. Note: This range is not designed for manufactured (mobile) home installation. • User servicing - Do not repair or replace any part of the appliance unless specifically recommended in the manuals. All other servicing should be done by a qualified technician. This may reduce the risk of personal injury and damage to the range. PARTS PROVIDED Anti-Tip Bracket TOOLS AND PARTS NEEDED: Range Power Supply Cord Kit (240V - 30 Amps) Standard Measuring Tape Phillips Head Screwdriver 1-1/4" Wrench Pencil T-20 Torx Screwdriver 3/8" Nut Driver Screws (2) and Anchors (2) for Anti-tip Bracket (Style will vary depending on mounting surface) Pipe Wrench (2) Teflon® Tape* or Pipe Joint Compound (Appropriate for use with LP gas and Natural gas) Channel Lock Pliers Gas Leak Test Solution Level Drill and Drill Bit Gas Supply Line (Flexible Metal Appliance Connector or Rigid Pipe) Gas Shut Off Valve (If not already present) Gloves and Safety Goggles WARNING If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. ■ Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. ■ WHAT TO DO IF YOU SMELL GAS: ■ Do not try to light any appliance. ■ Do not touch any electrical switch. ■ Do not use any phone in your building. ■ Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions. ■ If you cannot reach your gas supplier, call the fire department. Installation and service must be performed by a qualified installer, authorized service agency or the gas supplier. A CAUTION Do not use the oven or warming drawer (if equipped) for storage. A WARNING Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information consult a qualified installer, service agency, manufacturer or the gas supplier. Page 1 * Teflon is a registered trademark of DuPont A IMPORTANT SAFETY INSTRUCTIONS IMPORTANT: LOCAL CODES VARY. INSTALLATION, ELECTRICAL CONNECTIONS AND GROUNDING MUST COMPLY WITH ALL APPLICABLE CODES. • Proper Installation - Be sure your appliance is properly installed and grounded by a qualified technician in accordance with the National Electrical Code ANSI/NFPA No. 7 latest edition and local electrical code requirements. • This appliance has been tested in accordance with ANSI Z21.1, Standard for Household Cooking Appliances (USA) and in accordance with CAN 1.1-M81 Interim Reqt #58 Domestic Gas Cooktops (CANADA).(In Canada, installation must be in accordance with the CAN 1-B149.1 and .2 Installation Codes for Gas Burning Appliances and/or local codes) • It is recommended that the range be used in conjunction with a suitable ventilation system. The following must be met when testing supply piping system: a) The appliance and its individual shut-off valve must be disconnected from the gas supply piping system at test pressures in excess of 1/2 psig (3.5 kPa). b) The appliance must be isolated from the gas supply piping system by closing its individual manual shut-off valve during any pressure testing of the gas supply piping system at test ...
Questo manuale è adatto anche per i modelli :Piastra - HDS255U (3.3 mb)
Piastra - HDS256U (3.3 mb)