Log:
Ordina : Nome ↑   Scaricare   Valutazione   Size ↑  
Scaricare : 0   File Size : 11 kb   Produttore : Jenn-Air  
Categoria : Piastra
@name

• Distance from top of counter including manifold entrance is 7 1/2. • Electrical requirements : 110/120 volt AC, 60hz. Must be grounded. 15amp circuit required. Locate outlet below the cooktop a minimum of 5" below the countertop if not installing over an under counter oven. Locate outlet below the oven or in an adjacent cabinet when installing over an adjacent under counter oven. • Minimum clearance from top of counter to combustible material below is 4 7/16" • Countertop must be supported wit

Scaricare : 4   File Size : 11 kb   Produttore : Jenn-Air  
Categoria : Piastra
@name

spacing from cooktop edge to nearest vertical combustible wall to the RIGHT: Min. spacing from cooktop edge to nearest vertical combustible wall to the LEFT: Min. spacing from cooktop edge to nearest vertical combustible wall to the REAR: Minimum spacing to front edge of counter: Minimum distance between cooktop and cabinet directly above: Minimum width of cabinet directly above: Maximum depth of cabinets directly above and adjacent: Minimum distance between countertop and adjacent cabinet above

Scaricare : 1   File Size : 11 kb   Produttore : Jenn-Air  
Categoria : Piastra
@name

If cabinet storage is to be provided, the hazard can be reduced by installing a range hood that projects horizontally a minimum of 5" beyond the bottom of the cabinets. • Radius corners of cutout and file to insure smooth edges and prevent corner cracking (1/4" radius). This Data Sheet Includes Information On Jenn-Air • Product Model Number (s): • Page 2 36" Gas Cooktops: JGC8536ADB, JGC8536ADW, JGC8536ADQ and JGC8536ADS Subject to change without notice. This system is designed to be updated dai

Scaricare : 1   File Size : 11 kb   Produttore : Jenn-Air  
Categoria : Piastra
@name

Cooktop supplied with 1/2" NPT female inlet on regulator • NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at (775) 833-3633 • notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory • it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am • Sheets for





categorie