valutazioni - 5, GPA: 4.2
(
)
)
|
Foto e specifiche Toshiba E-STUDIO 351C |
Facilità d'uso
• The Internet Printer dialog box appears. 6. Enter the IP Address of this equipment in the “Printer Address” field and “Print” in the “Queue” field. Then click [OK]. 7. Click [Create...]. 8. Enter the Desktop Printer name and click [Save]. • The printer is added to the desktop. 9. Double-click the desktop printer icon that you created. • The Desktop Printer utility window opens. Printing Guide — Installing Client Software for Macintosh 2. Installing Client Software 2. Installing Client Software 10. Click the [Printing] menu and select [Change Setup...]. • The LaserWriter setup dialog box appears. 11. Select each option item in the “Change” drop down menu and select installed option in the “To” drop down menu according to the configuration of this equipment. • FInisher Not Installed — Select this when no finisher is installed. Single-Position Stapler — Select this when the Hanging Finisher is installed. Multi-Position Stapler — Select this when the Multi-staple Finisher or Saddle- stitch Finisher is installed. Multi-Position Stapler and Hole Punch — Select this when the Multi-staple Finisher or Saddle-stitch Finisher and Hole Punch unit are installed. NOTE: When you select “Multi-Position Stapler” or “Multi-Position Stapler and Hole Punch”, the saddle-stitching function will be selectable for printing. However, saddle-stitching is available only when the Saddle-stitch Finisher is installed. • Drawer Not Installed — Select this when no optional drawer is installed. Drawer 3 — Select this when the drawer 3 is installed. Drawer 3 & 4 — Select this when the drawer 3 and 4 are installed. LCF — Select this when the Large Capacity Feeder is installed. NOTE: LCF is not available for some countries or regions. 12. Click [OK]. Printing Guide — Installing Client Software for Macintosh 2. Installing Client Software 2. Installing Client Software Configuring Macintosh AppleTalk printing NOTE: Before installing the printer driver for AppleTalk printing on Macintosh, check with your system administrator to make sure of the following: -This equipment is connected to the network and turned on. -The AppleTalk settings is correct. 1. Click Apple menu and select [Chooser]. • The Chooser dialog box appears. 2. Select the LaserWriter 8 icon (and select the AppleTalk zone if configured). Then select this equipment displayed in the list, and click [Create]. • The Select a PostScript Printer Description File dialog box appears. 3. Select the PPD file (TOSHIBA_e-STUDIO451cSeries) for the equipment and click [Select]. Printing Guide — Installing Client Software for Macintosh 2. Installing Client Software 2. Installing Client Software 4. Select each option according to the configuration of this equipment and click [OK]. • FInisher Not Installed — Select this when no finisher is installed. Single-Position Stapler — Select this when the Hanging Finisher is installed. Multi-Position Stapler — Select this when the Multi-staple Finisher or Saddle- stitch Finisher is installed. Multi-Position Stapler and Hole Punch — Select this when the Multi-staple Finisher or Saddle-stitch Finisher and Hole Punch unit are installed. NOTE: When you select “Multi-Position Stapler” or “Multi-Position Stapler and Hole Punch”, the saddle-stitching function will be selectable for printing. However, saddle-stitching is available only when the Saddle-stitch Finisher is installed. • Drawer Not Installed — Select this when no optional drawer is installed. Drawer 3 — Select this when the drawer 3 is installed. Drawer 3 & 4 — Select this when the drawer 3 and 4 are installed. LCF — Select this when the Large Capacity Feeder is installed. NOTE: LCF is not available for some countries or regions. 5. Close the Chooser Dialog box. • The Printer icon is created on the desktop. Installing the Printer on Mac OS X 10.2.4 to Mac OS X 10.3.x Install and configure the printer by the following steps: • P.156 "Installing the Macintosh PPD File" .. P.159 "Configuring the Printer on Mac OS X" .. P.165 "Configuring the Installable Options" Installing the Macintosh PPD File This equipment supports printing from Mac OS X 10.2.4 to Mac OS X 10.3.x. Copying the PPD file to Mac OS X 1. Insert the Client Utilities CD-ROM into the CD-ROM drive and open your language folder in the “Client:MacPPD:OSX” folder. 2. Copy the GZ file (TOSHIBAeSTUDIO451cSeries.dmg.gz) to the desktop. Printing Guide — Installing Client Software for Macintosh 2. Installing Client Software 2. Installing Client Software 3. Double-click the GZ file on the desktop. • The installer window appears. 4. Double-click the icon in the installer window. • The Authenticate dialog box appears. 5. Enter the name and password, and click [OK]. • The welcome message is displayed. 6. Click [Continue]. • The Software License Agreement window is displayed. Printing Guide — Installing Client Software for Macintosh 2. Installing Client Software 2. Installing Client Software 7. Click [Continue]. 8. Click [Agree]. • The Select a Destination...
Questo manuale è adatto anche per i modelli :Stampanti - E-STUDIO 451C (5.34 mb)
Stampanti - e-STUDIO 281C (5.34 mb)