valutazioni - 4, GPA: 4.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Stampanti - SCX-3405FW/XFA (8.49 mb)
Stampanti - SCX-3405FW/XFA (4.61 mb)
Facilità d'uso
It means that the features are not supported (see "Variety feature" on page 10). Before printing in the duplex mode, decide on which edge you will be binding your finished document. The binding options are, as follows: • Long-Edge Binding: This option is the conventional layout used in book binding. • Short-Edge Binding: This option is the type often used with calendars. From your Macintosh application, select Print from the File menu. 1 Select Layout from the drop-down list under Orientation. 2 Select a binding orientation from the Two-Sided option. 3 Select the other options to use. 4 Click Print and the machine prints on both sides of the paper. 5 If you print more than 2 copies, the first copy and the second copy might print on the same sheet of paper. Avoid printing on both sides of paper when you are printing more than 1 copy. Using help Click the question mark on the bottom-left corner of the window and click on the topic you want to know about. A pop-up window appears with information about that option's feature, which is provided from the driver. Linux printing Some features may not be available depending on models or options. It means that the features are not supported. 4. Special Features 238 Printing features Printing from applications There are a lot of Linux applications that allow you to print using Common UNIX Printing System (CUPS). You can print on your machine from any such application. Open an application, and select Print from the File menu 1 Select Print directly using lpr. 2 In the LPR GUI window, select the model name of your machine from the 3 printer list and click Properties. Change the print job properties using the following four tabs displayed 4 at the top of the window. • General: Changes the paper size, the paper type, and the orientation of the documents. It enables the duplex feature, adds start and end banners, and changes the number of pages per sheet. Automatic/manual duplex printing may not be available depending on models. You can alternatively use the lpr printing system or other applications for odd-even printing. • Text: Specifies the page margins and set the text options, such as spacing or columns. • Graphics: Sets image options that are used when printing image files, such as color options, image size, or image position. • Advanced: Sets the print resolution, paper source, and destination. Click Apply to apply the changes and close the Properties window. 5 Click OK in the LPR GUI window to start printing. 6 The Printing window appears, allowing you to monitor the status of your 7 print job. To abort the current job, click Cancel. Printing files You can print many different types of files on your machine using the standard CUPS, directly from the command line interface. The CUPS lpr utility allows you to do that, but the driver’s package replaces the standard lpr tool by a much more user-friendly LPR GUI program. To print any document file: Enter lpr
Stampanti - SCX-3206W (7.97 mb)
Stampanti - SCX-3400 (7.97 mb)
Stampanti - SCX-3400/ALG (7.97 mb)
Stampanti - SCX-3400/STS (7.97 mb)