Log:
valutazioni - 0, GPA: 0 ( )

Istruzioni per l'uso Adaptec, Modello Adaptec RAID 5805Z

Produttore : Adaptec
File Size : 22.76 kb
File Nome :
Lingua di insegnamento: en
Vai a scaricare



da questo dispositivo ha anche altre istruzioni :

Facilità d'uso


To load the module manually (if it is not loaded already), use the command "modprobe sg". 2.5 VMware Setup Notes -To install and use Adaptec Storage Manager on the VMware ESX Server: 1. Mount the Adaptec Storage Manager installation CD: mount -r /dev/cdrom /mnt/linux/ 2. Change to the manager directory on the CD-ROM: cd /mnt/cdrom/linux/manager 3. Type one of the following commands to install the 32-bit or 64-bit Linux Adaptec Storage Manager on the VMware ESX Server: rpm --install ./StorMan*.rpm [32-bit] rpm --install --nodeps ./StorMan*.rpm [64-bit] 4. Type the following command to open the range of ports required by Adaptec Storage Manager to connect remotely: esxcfg-firewall -o 34570:34581,tcp,in,"StorMan" 5. Install Adaptec Storage Manager on a Windows or Linux machine. 6. From the Windows or Linux client, connect to the Adaptec Storage Manager Agent on the VMware ESX Server using the ASM GUI. -On the VMware ESX Server, the Adaptec Storage Manager Agent cannot be monitored from a guest operating system. 3. Adaptec Storage Manager General Cautions and Notes 3.1 General Cautions Page 4 readme.txt -This release supports a maximum of 8 concurrent online capacity expansion (OCE) tasks in the RAID array migration wizard. -While building or clearing a logical drive, do not remove and re-insert any drive from that logical drive. Doing so may cause unpredictable results. -Do not move disks comprising a logical drive from one controller to another while the power is on. Doing so could cause the loss of the logical drive configuration or data, or both. Instead, power off both affected controllers, move the drives, and then restart. -When using Adaptec Storage Manager and the CLI concurrently, configuration changes may not appear in the Adaptec Storage Manager GUI until you refresh the display (by pressing F5). 3.2 General Notes -Adaptec Storage Manager requires the following range of ports to be open for remote access: 34570-34580 (TCP), 34570 (UDP), 34577-34580 (UDP). -Adaptec Storage Manager generates log files automatically to assist in tracking system activity. The log files are created in the directory where Adaptec Storage Manager is installed. o RaidEvt.log - Contains the information reported in Adaptec Storage Manager event viewer for all local and remote systems. o RaidEvtA.log - Contains the information reported in Adaptec Storage Manager event viewer for the local system. o RaidNot.log - Contains the information reported in the Notification Manager event viewer. o RaidErr.log - Contains Java messages generated by Adaptec Storage Manager. o RaidErrA.log - Contains Java messages generated by the Adaptec Storage Manager agent. Information written to these files is appended to the existing files to maintain a history. However, when an error log file reaches a size of 5 Mbytes, it is copied to a new file with the extension .1 and the original (that...

Questo manuale è adatto anche per i modelli :
Altri componenti - Adaptec RAID 5805 (22.76 kb)
Altri componenti - Adaptec RAID 5445Z (22.76 kb)
Altri componenti - Adaptec RAID 5445 (22.76 kb)
Altri componenti - Adaptec RAID 5405Z (22.76 kb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie