valutazioni - 5, GPA: 3.8 ( )

Produttore : Apple File Size : 1.71 mb File Nome : Lingua di insegnamento:

To prepare a new air filter, contact your dealer and tell the air filter type number. Type number = NJ22222 And also when you replace the lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. 1. Turn the projector off, and unplug the power cord. Allow the lamp to cool for at least 45 minutes. 2. When the projector is suspended from the ceiling, apply the vacuum cleaner to and around the filter cover first, to prevent penetration of dust or the like. 3. While supporting the projector with one hand, use your other hand to pull the filter cover forward in the direction of the arrow. Remove the air filter. Handle Filter cover 11 4. Apply a vacuum cleaner to the air filter and the filter cover. Please replace the air filter when it is damaged or too soiled. 5. Replace the air filter in its original position. Secure the air filter in place by pressing each of the six locations. Make sure there is no dust or dirt remaining after the cover is in place. If any dust or dirt remains use a vacuum cleaner to remove it as when placing the filter cover on the air filter. Reattach the filter cover to the projector by aligning the filter cover with the grooves Air filter on the projector. While holding the handle, push down on the filter cover until it locks firmly in place. Filter cover Air filter’s knob mark Air filter (continued) 6. Turn the projector on and reset the filter time using the FILTER TIME function in the OPTION menu. (1) Press the MENU button to display a menu. When the EASY MENU has appeared, please skip the next step (2). (2) Point at the “OPTION” in the left column of the menu using Ў/^ button, then press the > button. (3) Point at the “FILTER TIME” using Ў/^ button, then press the > button. A dialog will appear. (4) Press the ^ button to select “RESET” on the dialog. It performs resetting the lamp time. 12 Replacing Internal Clock battery Replacing Internal Clock battery (for the models CP-S245, CP-X255 only) Consumption of the battery makes the clock not to work correctly. (Please refer to the User’s Manual - Operating Guide.) When the clock is wrong or it has stopped, please replace the battery according to the following procedures. WARNING >Always handle the batteries with care and use them only as directed. Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire. And also improper use may result in cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment. • Be sure to use only the batteries specified. Do not use batteries of different types at the same time. Do not mix a new battery with used one. • Make sure the plus and minus terminals are correctly aligned when loading a battery. • Keep a battery away from children and pets. • Do not short circuit or solder a battery. • Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry place. • If you observe a leakage of a battery, wipe out the flower and then replace a battery. If the liquid adheres to your body or clothes, rinse well with water immediately. • Obey the local laws on disposing the battery. OPENBattery Cover Knob 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the projector has cooled adequately, slowly turn over the projector, so that the bottom is facing. 3. Remove the battery cover. Turn the battery cover in the direction indicated “OPEN” using such as coins. Then the battery cover will come up. While removing the battery cover, pick its knob. 4. Take the old battery out. Press the metal claw of the battery holder. Then the battery will come up. Remove the battery. Metal claw 5. Put a new battery in. Replace battery with HITACHI MAXELL, Part No.CR2032 only. Use of another battery may present a risk of fire or explosion. Insert a new battery in the battery holder according to its “+” marking minus terminal as indicated in the battery holder, so that the side marked by + is facing. And push the battery into the battery holder fully to fix. 6. Close the battery cover. CLOSE Replace the battery cover in place, then turn it in the direction indicated “CLOSE” using such as coins, to fix. 13 ENGLISH About “User’s Manual – Operating Guide” The “User’s Manual - Operating Guide” of this projector is written into the CD-ROM. Before using, please read the following and use the CD-ROM correctly. CAUTION • Only use the CD-ROM in a computer CD drive. The CD-ROM is designed for PC use only. NEVER INSERT THE CD-ROM INTO A NON-COMPUTER CD PLAYER! Inserting the CD-ROM into an incompatible CD drive may produce a loud noise, which in turn MAY RESULT IN EAR AND SPEAKER DAMAGE! • After using CD-ROM, please put it into CD case and keep it. Please keep the CD neither in direct sunlight nor in a high temperature and high humidity environment. NOTE • The information in the CD-ROM is subject to change without notice...

Scarica la tua

Per scaricare, digitare 2 cifre :