valutazioni - 0, GPA: 5
(
)
)
|
Facilità d'uso
PK-EM1 © 2010 Victor Company of Japan, Limited EMETTEUR DE SYNCHRO 3D INSTRUCTIONS PK-EM1 EMISOR SINCRO 3D INSTRUCCIONES PK-EM1 English Francais Espanol Name of Parts 2.-. 2.- . 2. 2.-. C B 1.-.A A Loosen Fasten 3D SYNCHRO EMITTER 3D SYNCHRO EMITTER cable Connect it to the [3D Synchro] terminal of the projector. Stand (supplied) Use this when there is a need to adjust the angle for transmitting signals from the 3D SYNCHRO EMITTER to the 3D GLASSES. Platform Fixing screw hole for stand (x 4) Fixing screw for sync emitter unit Installation Install this product in the direction in which the 3D GLASSES are to be used so that infrared signals can reach the glasses directly. Install this product at a location where there are no obstructing objects in between it and the 3D GLASSES. By inclining the platform at an angle when installing this product on the stand, you can identify the bottom screws of the 3D SYNCHRO EMITTER easily, thus helping you to install the emitter more smoothly. In addition, you can also insert your fi ngers easily, making it easier to turn the set screws. Caution: When installing this product to a wall or ceiling, make use of screws that suit the material and strength of the wall or ceiling. Otherwise, it may cause damage to the material of the wall or ceiling. When using a screw, open a hole in the sponge at the bottom of the stand in advance. Request the authorized dealer or installation service provider to install this product securely with safety taken into thorough consideration. JVC will not be liable for any accident or damage due to causes such as improper installation, insuffi cient mounting strength, misuse, or natural disasters. Connection Turn off the power of the projector Connect the 3D SYNCHRO EMITTER cable to the [3D Synchro] terminal of the projector Note: For details on how to view 3D images, refer to the “Instruction Manual” of the projector. Caution: Do not connect any device to this product other than a JVC 3D projector. Main Specifi cations Power supply DC 12 V, 50 mA Operating temperature range 5 f to 35 f Operating humidity range 20 % to 80 % (no condensation) Infrared coverage Coverage distance Within 10 m Output angle (Vertical) approx. 20° (Horizontal) approx. 30° External dimensions (W x H x D) 80 mm x 23 mm x 90 mm (Main body) 80 mm x 49.5 mm x 90 mm (Including stand) Mass 160 g (Including 3D SYNCHRO EMITTER cable and stand) Accessories Stand 1. A 2. A B C . . . . . . . 1. 2. . . . Safety Precautions Make sure that the bolts and screws are securely fastened. Otherwise, the unit may fall off, resulting in injuries or accidents. Do not drop or dismantle/modify the product. Doing so may result in damage or malfunction. Make sure that you put on the 3D GLASSES when viewing 3D images. Do not view 3D images with naked eyes. Otherwise, you may experience discomfort. For those who have a pre-existing photosensitivity disorder or heart disease, or are feeling unwell, do not use the 3D GLASSES. When viewing 3D images, you may sometimes experience discomfort, such as eye fatigue or nausea. If you sense any change in your physical condition, stop viewing immediately and consult a doctor if necessary. A guardian must be present when children (particularly those below six years old) are using the 3D GLASSES. Children may fall sick suddenly as they may have diffi culty detecting any fatigue or discomfort. Pay attention to any change in the physical condition of the children when using the 3D GLASSES. Precautions During Use Place of storage and use When using the 3D GLASSES under a fl uorescent light in a room, the light of the room may appear t...
Questo manuale è adatto anche per i modelli :Proiettori - PK-EM1 (2.13 mb)