valutazioni - 3, GPA: 4
(
)
)
|
Foto e specifiche Samsung SR8730 |
Facilità d'uso
(Number of cleaning operations resumed: Once) Main unit button Remote control button (Option) Configuration Sequence About the Resume Cleaning function • If the Vacuum cleaning Robot has evaluated that cleaning is complete, the resume cleaning function is not performed. • If you move the Vacuum cleaning Robot when it is being charged or press a button, the Vacuum cleaning Robot judges cleaning to be complete and does not resume cleaning. A Do not move the Vacuum cleaning Robot when it is cleaning caution or press a button while it is cleaning. Otherwise, the Vacuum cleaning Robot judges cleaning to be complete and starts cleaning again from the beginning. NOTE While cleaning 26_ operating the cleaner Spot Cleaning You can conveniently clean a specific area that has a a lot of cookie crumbs, dust, and etc. ■ Move the Vacuum cleaning Robot to the location where you want to perform a spot clean. Main unit button Remote control button (Option) Configuration Sequence While cleaning area with a length of 1.5m and a width of 1.5m. - When the robot cleaner finishes cleaning, it will stop and enter Standby mode. When the Vacuum cleaning Robot is docked with the charger NOTE station, spot cleaning is not supported. operating the cleaner _27 03 OPERATING THE CLEANER Max Cleaning The Vacuum cleaning Robot automatically moves and cleans until the battery runs out and the battery level flashes only one level. ■ If cleaning begins when the Vacuum cleaning Robot is docked with the charger station, the time to return to the charger is decreased since the Vacuum cleaning Robot remembers its original position while moving. ■ If the battery level becomes low while cleaning, the Vacuum cleaning Robot automatically returns to the charger station and resumes cleaning after charging the battery. (Number of resumed cleaning operations: Once) (Hi Main unit button Remote control button (Option) Configuration Sequence (■^ % 3 times (when the product is not in the process of charging.) 2 times ((when the productt iis chargiing..)) Max Ok 1. Set the mode. % (g(MkM)i>) 2. Cancel the mode. Ë About the Resume Cleaning function • If the Vacuum cleaning Robot judges cleaning to be complete, resume cleaning is not performed. • If you move the Vacuum cleaning Robot while it is being charged or press a button, Vacuum cleaning Robot judges cleaning to be complete (cleaning is not resumed). (^FlashTI While cleaning A Do not move the Vacuum cleaning Robot while it is cleaning or caution press a button while cleaning. Otherwise, the Vacuum cleaning Robot judges cleaning to be complete and starts cleaning again from the beginning. NOTE 28_ operating the cleaner Manual Cleaning (Option) You can move the Vacuum cleaning Robot to clean a particular location directly by using the remote control. ■ Move the Vacuum cleaning Robot to the location where you want to perform manual cleaning. ■ You can manually clean using the remote control only. Remote control button (Option) Configuration Sequence Manual 1. Set the mode. • When the Vacuum cleaning Robot is docked with the NOTE charger station, manual cleaning is not supported. While cleaning Directional Buttons (Forwards, Left, Right) A backwards function is not supported. operating the cleaner _29 03 OPERATING THE CLEANER maintain toos ana filters CLEANING THE VACUUM CLEANING ROBOT Please keep the cleaning and maintenance methods in mind ■ ■ When the Power Switch is damaged, please contact the service agent so that it does not cause any accidents. Do not use any means or mechanical devices not installed by the manufacturer that could accelerate the deformation of the Vacuum cleaning Robot. ■ Always turn off the power switch at the bottom of the main unit before cleaning the robotic vacuum. The Vacuum cleaning Robot could operate suddenly and cause an injury. Cleaning the Sensor Window and the Camera You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic vacuum. ■ Never spray water, thinner, benzene etc. directly onto the main unit of Vacuum cleaning Robot. ■ Lightly wipe the sensor window or camera using a soft cloth. Front Sensor window Front Sensor Window and Camera Cliff Sensor Window Rear Sensor Window 30_ maintain tools and filters Cleaning the Dust Bin and the Filters First, empty the dust bin before cleaning it. ■ When separating the dust bin, take care not to spill the dust Fllter out of the dust bin. ■ Empty the dust bin in the following cases. 1. When dust has accumulated inside the dust bin. 2. When the suction power suddenly becomes weak. ^^ 3. When the noise suddenly increases. Dust Bln Cover 1. Press the Dust Bin Eject (PUSH) button and pull the dust bin to separate the dust bin. 2. Separate the dust bin cover by pulling it in the direction of the arrow in the figure. 3. Separate the Filter from the dust bin by pulling it in the direction of the arrow in the figure. ■fp^ 4....
Questo manuale è adatto anche per i modelli :Aspirapolvere - VRAT10AT (21.27 mb)
Aspirapolvere - VRAT10BT (21.27 mb)
Aspirapolvere - SR8750 (21.27 mb)