valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
AUDIOVOX ACCEPTS NO LIABILITY FOR LOST CONTENT OR DATA, OR FOR THE SECURITY OF ANY PERSONAL CONTENT OR DATA ON THE RETURNED DEVICE. Product will be returned with factory default settings, and without any pre-loaded content which may have been installed in the originally purchased products. Consumer will be responsible for reloading data and content. Consumer will be responsible to restore any personal preference settings. • Properly pack your unit. Include any remotes, memory cards, cables, etc. which were originally provided with the product. However DO NOT return any removable batteries, even if batteries were included with the original purchase. We recommend using the original carton and packing materials. • Include evidence of purchase date such as the bill of sale. Also print your name and address and a description of the defect. Send via standard UPS or its equivalent to: Audiovox Electronics Corp. Attn: Service Department. 150 Marcus Blvd., Hauppauge N.Y. 11788 1-877-833-3491 • Insure your shipment for loss or damage. Audiovox accepts no liability in case of damage or loss en route to Audiovox. • Pay any charges billed to you by the Exchange Center for service not covered by the warranty. • A new or refurbished unit will be shipped to you freight prepaid. What we will do: Provide you with a new, or at our option, a refurbished unit. The exchange unit is under warranty for the remainder of the original product’s warranty period. For Canada Customers, please ship to: Audiovox Return Centre c/o Genco 6685 Kennedy Road, Unit#3, Door 16, Mississuaga, Ontario L5T 3A5 More information To set the clock: 1. Slide the / WAKE 1 / WAKE 2 / switch to to enter the clock setting mode. 2. Press or to set the time. • Press and hold to decrease or increase the time value quickly. • The “:” fl ashes on the display in clock setting mode. 3. Slide the / WAKE 1 / WAKE 2 / switch to . • The clock is in 12 hour format. The AM indicator lights to show am time. • The clock time blinks if it is not set or after power interruption (without back-up battery installed). Setting wake time 1. Slide the / WAKE 1 / WAKE 2 / switch to select WAKE 1 or WAKE 2 setting mode. 2. Press or to set the wake time. • Press and hold to decrease or increase the time value quickly. • The “:” fl ashes on the display in wake time setting mode. 3. Slide the / WAKE 1 / WAKE 2 / switch back to . Selecting wake source • Press WAKE 1 or WAKE 2 repeatedly to select a wake source (tone / radio ). • The green indicator lights against the corresponding wake icon when the wake source is selected. Wake to tone When wake to tone is selected, the green indicator lights against the icon. • The unit equips with GRAD-U-WAKE feature, the alarm tone volume will increase gradually to its maximum in about 30 to 45 seconds. • If you set SLEEP function with low volume level before going to bed, we advise using Wake to tone mode to wake you up since its volume will automatically increase. Wake to radio When wake to radio is selected, the green indicator lights against the icon. To set wake station: 1. Select radio band. 2. Select desired station. 3. Adjust the volume by + VOL –. Turning off alarm To silence the alarm momentarily: • Press SNOOZE or any one of the SmartSnoozeTM buttons ( / / ). The alarm will sound again when the snooze period is over. (Read “SmartSnoozeTM”) To stop the alarm completely: • Press ON/OFF. The alarm will activate again at the same time on the following day. To disable the wake function completely: • Press WAKE 1 or WAKE 2 repeatedly until no indicator lights against the wake icons ( / ) on the display. • You can activate the previously set alarm time by pressing the WAKE 1 or WAKE 2 button. • When AC power is interrupted and the unit is operating through the DC backup batteries, all wake mode will work with buzzer instead. SmartSnoozeTM • This operation allows extra sleep time after the alarm is on. The alarm can be turned off temporarily by pressing SNOOZE or any one of the SmartSnoozeTM buttons until the snooze period is over. • SmartSnoozeTM buttons include: / / / SNOOZE. • Snooze function can be used repeatedly up to 2 hours. After this, the alarm will turn off until the next alarm conditions are met. To set the “quiet” period: 1. Press and hold SNOOZE. 2. Press or to adjust snooze time. Release button, then, the “quiet” period is set. • The “quiet” period is from 1 minute to 30 minutes. (The default time is 9 minutes) • SmartSnoozeTM will be activated only when the / WAKE 1 / WAKE 2 / switch is set to . Wake function In sleep mode, the unit will turn off automatically after a specifi ed time. To set sleep time: 1. Press . The time display will show “0:59” and the radio will turn on. 2. While holding , press or to set the time for sleep mode. • The time range is from 1 minute to 2 hours. (The default time is 59 minutes.) 3. Release and the display will revert to the current time. • You may select radio stations as usual in sleep mode. The r...