valutazioni - 3, GPA: 3.3
(
)
)
|
Facilità d'uso
3. Press NAVIGATION key to select AUTO HANG-UP and then press OK 1. Press MENU key to enter menu selection. This appliance has been designed and manufactured with high quality materials and If the received number is the same as one in your phonebook, the name from (Enter the new PIN and then press OK key to confirm. A confirmation beep is components that can be recycled and reused. Electrical and electronic appliances are liable played.) Connection with the external call is established. key to select. 2. Press NAVIGATION key to select ADVANCED SET and then press OK to contain parts that are necessary in order for the system to work properly but which can Note : To put the internal call on hold and answer the incoming external call, 4. Press NAVIGATION key to select ON or OFF and then press OK key to key to select. If a call is from someone who withheld their number, the display will show become a health and environmental hazard if they are not handled or disposed of in the press INT key. confirm. A confirmation beep is played. Register your handset 3. Press NAVIGATION key to select RESET and then press OK key to select. proper way. Consequently, please do not throw out your inoperative appliance with the IMPORTANT: When you purchase a telephone, all handsets are already 4. Press OK key again to confirm. A confirmation beep is played and the unit is household waste. registered to the base, so you do not need to register them. Handset reset to its default settings. If the call is from someone whose number is unavailable, or if you have not Switch between an internal and external call Set date/time format If you are the owner of the appliance, you must deposit it at the appropriate local collection subscribed to Caller ID but have set the date and time, the display will show You can set your preferred date/time format for your phone. The default During the call, press key to switch between an internal or external registration is only necessary when you buy extra handsets or if a handset point or leave it with the vendor when buying a new appliance. format is DD/MM and 24 HOURS. Technical details - If you are a professional user, please follow your supplier's instructions. call. has become faulty. Free field range Up to 300 meters* Indoor range Up to 50 meters* Handset battery life (average values) Number of handsets 7 hours talktime** 100 hours standby** Up to 4 Intercom mode Yes Three -way confere Yes (1 outside correspondent + 2 internal correspondents) Electrical connection / Base: S003IV0600050 or IA5060 Base mains adapter / Charger: S003IV0600015 or IA5060 Charger Input: 100-240 V / 50-60 Hz Output: 6V DC / 500 mA(BASE) 6V DC / 150mA (charger) ; (500mA for IA5060) Only use the adapters supplied with the telephone. Single-phase AC, excluding IT installations defined by the EN 60950 standard. Caution: the network voltage is classified as a hazard by the criteria of this standard. Telephone connection Appliance designed for connection to a TNV3 class (telecommunications network voltage) analogue telephone line as defined by the EN 60950 standard. Batteries Corun / Sanik – AAA – 1.2 V – 400 mAh Only use the batteries supplied with the telephone. Using any other type of battery presents a risk of explosion. Used batteries must be disposed of in compliance with current environmental protection regulations. Operating temperature From 5 to 40° C - If the appliance is rented to you or left in your care, please contact your service provider. Set time format The procedure described below is for Versatis E100 or Versatis E150. They Establish a three-party conference call Keen to preserve the environment, ATLINKS has equipped this appliance with a switching Press 1. Press MENU key to enter menu selection. may be different if you want to register another handset model, in which case power supply, offering better energy efficiency. The advantages include not only very low The calls are displayed in chronological order with the most recent call at the 2. Press NAVIGATION key to select CLOCK&ALARM and then press OK you should refer to its user guide. The conference call feature allows one external call to be shared with two electricity consumption, but also a more compact format than the conventional power handsets (in intercom). The three parties can share the conversation and no top of the list. key to select. supply units used by the previous range. Additional handsets must be registered to the base unit before you can additional network subscription is required. The used batteries from your telephone (if it has batteries) must be disposed of in 1. Press OK key to display more details of the call, including the date and time. 3. Press NAVIGATION key to select SET FORMAT and then press OK key use them. Up to 4 handsets can be registered to one base station. During an external call, press INT key to put the external call on hold compliance with current environmental protection regulations. Comply with your local to selec...
Questo manuale è adatto anche per i modelli :Telefoni cordless - E100 (1.66 mb)