To Turn key tones on/off 26 .. To Set flash (Recall) time 26 .. To Set Dialling Mode (Tone/Pulse) 27 .. To Set Base to default settings 27 .. To Change the PIN code 28 Troubleshooting 29 Cleaning and Care 31 Declaration of Conformity 31 Guarantee and Service 32 Technical Details 33 Connection and conditions for use. You can connect your Concept Combo 2300 to a direct exchange line (DEL) - a line connected to a local exchange, with its own phone number; to an extension on an approved compatible P

It is shown in hours, minutes and seconds format (HH:MM:SS). 4.2 Answer a Call If the handset is not on the base or a charging cradle: When the phone rings, press or to answer the call. If the handset is on the base or a charging cradle, and if AUTO ANSWER is set to ON: When the phone rings, pick up the handset to answer the call automatically, without having to press any button. 4.3 End a Call During a call connection, press to end the call. OR Put t

7.3.6 RENAME THE HANDSET......................................................................................... 7.3.7 CHOOSE THE INFORMATION TO BE DISPLAYED IN IDLE .................................. 7.3.8 SET THE AUTO ANSWER ...................................................................................... . 7.4 BASE SETTINGS ....................................................................................................... 22 5.1 ADD A NEW PHONEBOOK ENTRY ............................

12 4.3 Answer a Call................................................................................................................................................12 4.4 End a Call.......................................................................................................................................................12 4.5 Adjust Earpiece and Handsfree Volume.....................................................................................................12 4.6 Mute a Call..

Do not connect the Symphony extension to a payphone. The ringer equivalence numbers (RENs) of all instruments (phones, fax machines, etc.) connected to an exchange line must not add up to more than 4 — otherwise, one or more of them may not ring answer calls correctly. The Symphony 2210 telephones have a REN of 1 unless marked 3 Read these notes first Before you install your Symphony 2210 — Choosing a site for the base unit telephone and charger pod The base unit and charger pod(s) should be pla

Press and hold to put base into registration i CHARGING CRADLE Display Icons and Symbols The LCD display gives you information on the current status of the telephone. Y-С fjjlOK ► £ Indicates you can scroll up / down the menu items / Phonebook list / Redial list/Call List ’Y' Steady when the handset is in range of the base. Flashes when out of range of the base or not registered to the base. ^ Steady when an intercom call is in progress. Flashes when there is an incoming internal call. f

1. Press

15 4.1.3 CALL FROM THE PHONEBOOK .............................................................................. 15 4.1.4 CALL FROM THE CALL LIST .................................................................................. 15 4.1.5 CALL FROM THE REDIAL LIST................................................................................ 15 4.1.6 CALL TIMER ........................................................................................................ 15 4.2 ANSWER A CALL ...........

your own OGM, it will be used when the answering machine answers the call. If your 4. Press

1 INSTALLING YOUR PHONE 1.1 1.2 1.3 If you have a Broadband Line If you connect your telephone to a line with a broadband connection, you will need to insert a micro-filter between the telephone and the telephone line, otherwise you may get interference between the telephone and the broadband, which could cause problems. In a home with broadband, every telephone must have a micro-filter connected, not just the one at the telephone point that your modem is connected to. If you need more broadband