valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
Specifications CEA Power Ratings PS260 Power Output: 57 watts RMS X 2 channels into 4-ohms @ < 1% THD+N Additional Power Output: 75 watts RMS X 2 channels into 2-ohms @ < 1% THD+N 155 watts RMS X 1 channel (Bridged mono) into 4-ohms @ < 1% THD+N Dynamic Power: 114 watts X 2 channels into 4-ohms Dimensions: 7" X 12" X 2 ." (180mm X 302mm X 55.5mm) PS285 Power Output: 80 watts RMS X 2 channels into 4-ohms @ < 1% THD+N Additional Power Output: 105 watts RMS X 2 channels into 2-ohms @ < 1% THD+N 215 watts RMS X 1 channel (Bridged mono) into 4-ohms @<1% THD+N Dynamic Power: 160 watts X 2 channels into 4-ohms Dimensions: 10" X 12" X 2 . " (250mm X 302mm X 55.5mm) PS2130 Power Output: 123 watts RMS X 2 channels into 4-ohms @ < 1% THD+N Additional Power Output: 165 watts RMS X 2 channels into 2-ohms @ < 1% THD+N 345 watts RMS X 1 channel (Bridged mono) into 4-ohms @ <1% THD+N Dynamic Power: 246 watts X 2 channels into 4-ohms Dimensions: 12" X 12" X 2 ." (300mm X 302mm X 55.5mm) PS2180 Power Output: 180 watts RMS X 2 channels into 4-ohms @ < 1% THD+N Additional Power Output: 220 watts RMS X 2 channels into 2-ohms @ < 1% THD+N 450 watts RMS X 1 channel (Bridged mono) into 4-ohms @ < 1% THD+N Dynamic Power: 360 watts X 2 channels into 4-ohms Dimensions: 15" X 12" X 2 ." (381mm X 302mm X 55.5mm) General Specifications Frequency Response: 10Hz to 50kHz (-3dB) Signal to Noise Ratio: 100dBA below reference. (Reference: 1 watt, 4-ohms) Channel Separation @ 1kHz: <60dB (Reference: 1 watt, 4-ohms) Input Sensitivity: 300mV to 8V for full power output at clipping (1% THD+N) Bass Boost: 0 to +18dB @ 45Hz, continuously variable Crossover: 12dB/octave, 40Hz to 400Hz, Butterworth alignment Reference Supply Voltage for rated power: 14.4VDC Power Supply: 14.4VDC, (11 to 16VDC allowable), negative ground Specifications subject to change without notice. 11 PS260 / PS285 / PS2130 / PS2180 Localizacion de Problemas Problema Causa Accion Correctiva No hay energia No llega energia a la terminal +12V Verifique fusibles No llega energia a la terminal REM Verifique fusible(s) de la unidad principal y el cableado Fusible quemado en la bateria Reemplace el fusible e identifique la causa del fallo Fusible quemado en el amplificador Reemplace el fusible e identifique la causa del fallo Conexion a tierra defectiva Conecte nuevamente la toma a tierra electrica principal al metal descubierto del chasis Volumen demasiado sensible Control de nivel de entrada demasiado alto Reajuste el nivel de entrada (refierase a la pagina 10) Sonido distorsionado Control de nivel de entrada demasiado alto Reajuste el nivel de entrada (refierase a la pagina 10) Quema fusibles en el amplificador Cables de energia conectados incorrectamente Conecte nuevamente y de manera apropiada los cables de energia Problema interno con el amplificador Lleve la unidad al servicio Ruido del motor / Chirrido del alternador Toma a tierra en puntos de diferente potencial de voltaje Utilice cables RCA con proteccion de calida...
Questo manuale è adatto anche per i modelli :Ricevitore e l - PS260 (1003.51 kb)
Ricevitore e l - Jensen PS2130 (1003.51 kb)
Ricevitore e l - Jensen PS285 (1003.51 kb)