valutazioni - 3, GPA: 4 ( )

Produttore : Kenwood File Size : 1.26 mb File Nome : Lingua di insegnamento:

When listening to music, you will be able to enjoy the experience of sheer STEREO surround sound. DTS DTS (Digital Theater System) is a 5.1 channel digital audio format that provides five full-spectrum channels and one low-frequency (subwoofer) channel for unprecedented clarity, optimum channel separation and a (wide) dynamic range. In the DTS mode, the 5.1 channel digital input from a DTS CD, LD or DVD disc (carrying the “DTS” marking) can be played in Digital Surround. Important: When a DTS disc is played on a CD, LD or DVD player, noise may be output from the analog output. It is recommended that you connect the digital output of the player to the digital input of this unit. DSP surround modes The DSP (Digital Signal Processor) used for this receiver incorporates a variety of high quality adjustable sound fields, like “ARENA”, “JAZZ CLUB”, THEATER”, STADIUM” and “DISCO”. It is compatible with almost any kind of program source. DVD 6-channel input (For VR-715/KRF-V5070D only) If you own a DVD player equipped with 6-channel output, this receiver allows you to obtain the full surround sound impact of DVD source material featuring multi-channel encoding. Since the source signals are digital and each channel is input independently, the resulting ambience is far superior to what can be achieved with conventional surround sound systems. ACTIVE EQ ACTIVE EQ mode will produce a more dynamic sound quality in any condition. You can enjoy a more impressive sound effect when ACTIVE EQ is turned on during Dolby Digital and DTS playback. IR (InfraRed) remote control In addition to the basic receiver opeations, this IR remote control supplied can also operate Kenwood cassette deck, MD recorder or CD player which are connected using the system control cords. This remote control can also control Kenwood DVD players directly without using the DVD players’ remote control. Note to CATV system installer This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. As an ENERGY STAR® Partner, Kenwood Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.This product can save energy. Saving energy reduces air pollution and lowers utility bills. 5 EN Names and functions of parts Main Unit Frequency display, Input display, AUTO DETECT Preset channel display, indicator POWER STANDBY ON . STANDBY POWER STANDBY DIMMER SPEAKERS ON . OFF PHONES ACTIVE EQ LISTEN MODE INPUT MODE BAND AUTO MEMORY ACTIVE EQ DTS DOLBY DIGITAL SOUND SETUP MULTI CONTROL INPUT SELECTOR DOWN MUTE UP VOLUME CONTROL ON OFF ON . STANDBY For VR-705/ 715 Display Speaker selection indicators Input channel indicators Output channel indicators Band indicators STEREO indicator Surround mode display Speaker indicator PRO LOGIC indicator DOLBY DIGITAL indicator DTS indicator CLIP indicator AUTO indicator MEMO. indicator ST. indicator TUNED indicator MUTE indicator TONE indicator LOUDNESS indicator 96kHzfs indicator DSP indicator DIGITAL indicator 6CH INPUT indicator 1 POWER ON/OFF key ^ (For KRF-V5070D/V4070D/V5570D) Use to turn the main power ON/OFF. 2 ON/STANDBY key ^ (For KRF-V5070D/V4070D/V5570D) Use to switch the power ON/STANDBY when the POWER is turned ON. STANDBY indicator 2 POWER ON/STANDBY key (For VR-705/715) ^ Use to turn the power ON/STANDBY. STANDBY indicator 3 DIMMER key Use to select the REC MODE. ) Use to adjust the brightness of the display. ¶ 4 LISTEN MODE key . Use to select the listening mode. 5 Surround LED (light-emitting diode) indicators ACTIVE EQ mode LED indicator ( Lights when the receiver is in the ACTIVE EQ mode. DTS mode LED indicator . Lights when the receiver is in the DTS mode. DOLBY DIGITAL mode LED indicator . Lights when the receiver is in the Dolby Digital mode. 6 SOUND key § Use to adjust the sound quality and the ambience effects. 7 MULTI CONTROL knob ^ Use to control a variety of settings. 8 INPUT SELECTOR knob * Use to select the input sources. 9 VOLUME CONTROL knob * 0 PHONES jack ( Use for headphone listening. ! SPEAKERS ON/OFF key * Use to turn the speakers ON/OFF. @ ACTIVE EQ key ( Use to select ACTIVE EQ setting. # INPUT MODE key 8 Use to switch between full auto, digital and analog inputs. $ BAND key . Use to select the broadcast band. % AUTO key Use to change “TAPE” indication to “MD”. * Use to select the auto tuning mode. . ^ MEMORY key . Use to store radio stations in the preset memory. & SETUP key ^ Use to select the speakers' settings etc. * MUTE key ( Use to temporarily mute the sound. Standby mode Connection at POWER ON/OFF key (for KRF-V5070D/V4070D/ V5570D) While the standby indicator is lit, a small amount of power is supplied to the system to back-up the memory. This is called standby mode. Under The power in this equipment...

Scarica la tua

Per scaricare, digitare 2 cifre :