These difficulties include: smearing video, unstable sync, low image contrast, and mismatched resolution between a laptop and a display. With its extremely small size, the DA103-217 fits into small spaces as well as behind any wall mounted LCD display. The DA103-217 comes with a short VGA cable and a low profile external power supply that takes space similar to that of a regular power cord. Figure 1. The DA103-217 VGA line driver and receiver Features and Application The DA103-217 can be used as

400-0435-005 2 SPECIAL APPLICATION ABOUT YOUR TP115-111 2 TECHNICAL SPECIFICATIONS 3 TP115-111 COMPUTER/COMPONENT TWISTED PAIR (TP) TO VIDEO + AUDIO RECEIVER The TP115-111 receives computer video and audio signals over Twisted Pair-type (CAT-5) cable when used together with an ALTINEX Twisted Pair transmitter, such as the TP115-110. As with the TP115-110, the TP115-111 is streamlined and lightweight for applications that have small space requirements. The unit offers video equalization for up to

INTERFACES MANUAL PART NUMBER: 400-0103-001 PRODUCT REVISION: 2 VA6822 SYSTEM INTERFACE WITH AUDIO & EQUALIZATION USER’S GUIDE INTERFACES TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS...............2 GENERAL..........................................................2 RACK MOUNT SAFETY GUIDELINES..............2 INSTALLATION .................................................2 CLEANING ........................................................2 FCC / CE NOTICE....................................

16. [CLR] This command clears the members for a single group or for all nine groups. Command Format: [CLRGkUi] k = group number (k = # from 1-9) i = unit number (i = # from 0-9) Example: To clear group #1, send the [CLRG1U1] command. This command clears the members for the specified group only. 13 MULTI-TASKER To clear all groups of unit 1, send the [CLR GU1] command. 17. [GkUi] This command is used to request group data. With the command, the user can identify which input or output of a particu

Command Format: [LOD0CnUi] Cn = Card ID (n = slot # from 1 to max slots) Ui = Unit ID (i = # from 0 to 9) Example: Turn OFF the Loudness feature of the MT113-100/101 in slot #4 by sending the command [LOD0C4]. 19. [LOD1] This command enables the loudness feature. Command Format: [LOD1CnUi] Cn = Card ID (n = slot # from 1 to max slots) Ui = Unit ID (i = # from 0 to 9) Example: Turn ON the Loudness feature of the MT113-100/101 in slot #4 by sending the command [LOD1C4]. 20. [MUT0] This command ena

Send the command [?] and receive the following feedback: [(MT101-102U0)(MT113-100C04)] MT101-102U1 = Panel Number and Unit ID MT113-100C04 = An MT113-100 is in slot 4. 5. [?C] This command will return general information about the card and its status. It is a function of both the card and the front panel and is only available with MultiTasker Front Panel systems that have the following firmware: 400-0209-002 10 MULTITASKER™ 690-0122-015 = Version 015 or later. 690-0123-004 = Version 004 or later

PATH OPERATION This command will set the path for the output, but it is not active until the switch command, [SW], is executed. Commands ending in "P" are not executed immediately. The path for outputs on multiple cards or the same card may be preloaded. Command Format: [OFFmCnP] m = Output no. (m = # from 1 to 4) Cn = Card ID (n = # from 1 to max slots) P = Path Example: There are two MT108-103 cards, C6 and C7. Disable Output 1 of C6 and Output 3 of C7 simultaneously using the following comman

Command Format: [VERCnUi] Cn = card ID number (n = # from 1 to 19) 6 MULTI-TASKER Ui = Unit ID (i = # from 0 to 9) (refer to the MT100-100 user’s guide for explanation) Example: If one MT108-103 card is plugged in slot #2 of unit 3: Sending the command [VERC2U3], will yield the following feedback from the Multi-Tasker™ MT108-103 690-0127-007 MT108-103 = card type 690-0127-007 = software version 2. [C] This command receives the status of the card. Command Format: [CnUi] Cn = card id (n = from 1 t

TECHNICAL SPECIFICATIONS 3 FEATURES/DESCRIPTION ISV3000s GENERAL Inputs Input Connector RCA female/S-Video Audio Input Connectors 2 RCA female Outputs Video Output Connector 2-pin terminal block Audio Output Connector 5-pin terminal block Power 9VDC 500mA supply 2-pin terminal block Compatibility C-Video NTSC, PAL, SECAM Table 1. ISV3000s General MECHANICAL ISV3000s Depth (inches) 4.1 in (105 mm) Width (inches) 1.5 in (39 mm) Height (inches) 2.1 in (54 mm) Weight (pounds) 1.0 lb (0.45 kg) Ship W

Output offers standard RGBHV or RGBS format. MECHANICAL TR6102HD Width (inches) 8.50in (216mm) Height (inches) 1.75in (44mm) Depth (inches) 4.93in (125mm) Weight (pounds) 2.0lbs (0.91kg) Ship Weight (pounds) 4.0lbs (1.82kg) Material 0.1” Al Finish Gray Front/Back Panels Lexan Overlay T° Operating 10°C-35°C T° Maximum 50°C Humidity 90% non-condensing MTBF (calculations) 40,000hrs Table 2. TR6102HD Mechanical ELECTRICAL TR6102HD Input Video Signal (Y) Nominal Level 0V to 0.7Vp-p (Y) Maximum Level