valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
(OPT4) (1) Bracket: 3583-14101 (2) J-handle: 6367-14200 ¦ BALANCE UNIT 1. Put on strap and attach unit to strap. 2. Slide clamp up or down until unit balances with head just touching on the ground. (OPT5) ¦ STARTING THE ENGINE Please refer 5.For safe operation (P.9~10), 8.Operation (P.18). • The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to rotate as soon as the engine is WARNING IMPORTANT IMPORTANT OPT4 (1) OPT3 OPT5 (1) (3) (2) OPT2 WARNING IMPORTANT IMPORTANT OPT4 (1) OPT3 OPT5 (1) (3) (2) OPT2 11. Optional blade usage started by putting the throttle into the start position. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts. (OPT6) ¦ CUTTING METHOD a) Use the front left side cutting. b) Guide the blade from your right to left with it tilted slightly to your left. (OPT7) c) When mowing a wide area, start working from your left end to avoid interference of cut grass. d) The blade may be seized by weeds if the engine speed is too low, or the blade cuts too deep into weeds. Adjust the engine speed and cutting depth according to the condition of object. • If the grass or other object gets caught in the blade, or if the unit starts to shake or vibrate, turn off the engine and check the whole unit. Change the blade if it has been damaged. •Turn off the engine and make sure the blade has completely stop before checking the blade, and removing any object got caught in. ¦ OPERATION 1. Check the bolt to fasten the blade and be sure the bolt has no fault, and no abrasion. 2. Be sure that the blade and the holder have been fastened according to instruction and the blade turns smoothly without abnormal noise. (OPT8) • The rotating parts fastened incorrectly may cause serious accident to the operator. • Make sure that the blade is not bent, warped, cracked, broken or damaged. • If you find any error to the blade, discard it and change new one which is certified by RedMax. WARNING WARNING OPT8 .27 . OPT7 OPT6 WARNING WARNING OPT8 .27 . OPT7 OPT6 ¦ By using the shoulder strap, hang the unit on your right side. Adjust the strap length so that the cutting head may become parallel to the ground. (OPT9) Make sure to use shoulder strap and debris guard. If not, it is vary dangerous when you slip or lose your balance. ¦ CONTROLLING BLADE BOUNCE • Kick out can cause serious personal injury. Carefully study this section. It is important that you understand what causes kick out, how you can reduce the chance of kick out and how you can remain in control of the unit if kick out does occur. 1. What causes kick out: • Kick out can occur when the moving blade contacts an object that it cannot cut. This contact causes the blade to stop for an instant and then suddenly move or ”bounce” away from the object that was hit. The operator can lose control of the unit and the blade can cause serious personal injury to the operator or any person nearby if the blade contacts any part of the body. 2. How you can reduce the chance of kick out: a. Recognize that kick out can happen. By understanding and knowing about bounce, you can help eliminate the element of surprise. b. Cut fibrous weeds and grass only. Do not let the blade contact materials it cannot cut such as hard, woody vines and brush or rocks, fences, metal, etc c. Be extra prepared for bounce if you must cut where you cannot see the blade making contact such as in areas of dense growth. d. Keep the blade sharp. A dull blade increase the chance of bounce. e. Avoid feeding the blade too rapidly. The blade can bounce away from material being cut if WARNING WARNING 11. Optional blade usage .28 . OPT9 WARNING WARNING 11. Optional blade usage .28 . OPT9 OPT10 the blade is fed faster than its cutting capability. f. Cut only from your right to your left. g. Keep your path of advance clear of material that has been cut and other debris. 3. How you can maintain the best control: a. Keep a good, firm grip on the unit with both hands. A firm grip can help neutralize bounce. Keep your right and left hands completely around the respective handles. b. Keep both feet spread apart in a comfortable stance and yet braced for the possibility that the unit could bounce. Do not overreach. Keep firm footing and balance. ¦ MAINTENANCE BLADE • Check the blade and the fasteners for looseness, cracking, or bending. • Check the cutting edges and reform with a flat file. Point (OPT10) : 1. Keep the end corner sharp. 2. Round the root of the edge, using round file. 3. Do not use water when using a grinder. IMPORTANT • It is recommended that filing should be done by professionals. • Especially regarding filing the 22,24-tooth blade, Leave it to the professionals. ¦ TRANSPORTING THE UNIT • When you finish cutting in one location and wish to continue work in another spot, turn off the engine, ...
Questo manuale è adatto anche per i modelli :Prodotti per il Giardino - BCZ3000S (1.32 mb)