valutazioni - 3, GPA: 4 ( )

Produttore : Echo File Size : 706.46 kb File Nome : Lingua di insegnamento:

Tighten and/or replace as needed. • Inspect shield for damage and make sure it is securely in place. Replace if shield is damaged or missing. • Check that the cutting attachment is firmly attached and in safe operating condition. IMPORTANT 80-Tooth blade requires professional sharpening. NOTE ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by ECHO. WARNING Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. • ALWAyS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stopbefore removing obstructions, clearing debris, or servicing unit. • DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit. • NEVER reach into any opening while the engine is running. Moving parts may not be visible through openings. 1 2 34 desCrIpTIon Locate these safety decals on your unit. Make sure the decals are legible and that you understand and follow the instructions on them. If a decal cannot be read, a new one can be ordered from your ECHO Dealer. See PARTS ORDERING instructions for specific information. PAS 80 Tooth Blade Trimmer Atta chment Operat or's Manual 7 Contents After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts. ___ 1 - Pro Attachment SeriesTM Brushcutter Attachment ___ 1 - Operator's Manual ___ 1 - Warranty Registration Card ___ - Assembly Tool (s) ___ 1 - 80 Tooth Metal Blade ___ 1 - Metal shield ___ 1 - Shield bracket ___ 1 - 4-Hole Barrier Bar ___ 1 - 2-Hole Barrier Bar ___ 3 - 5mm x 10mm screws (shield mounting) ___ 2 - 5mm x 8mm screws (bracket mounting) ___ 4 - 5mm nuts (bracket mounting) ___ 4 - 5mm lockwashers (bracket mounting) ___ 4 - 5mm x 35mm bolts (barrier bar) ___ 4 - 5mm nuts (barrier bar) ___ 9 - Split pins ___ 1 - Storage Hook Assembly ___ 1 - Shoulder Harness w/Quick-release Hook 1. LOWER DRIVE SHAFT ASSEMBLY - Includes the Debris Shield Assembly, Gear Housing assembly, Flexible Drive Cable, Metal Blade and Safety Decals. 2. FLEXIBLE DRIVE CABLE - Cable end fits into upper drive shaft coupler. Lubricate drive cable every 25 hours with Echo® LubeTM grease. 3. METAL BLADE SHIELD - Required when unit is equipped with blades. Do not operate unit without shield. 4. BLADE - Circular blade for brush cutting applications. Harness, metal shield and U-handles required for blade operation. Shaft Decals Debris Shield Decal assembly A B D E C D C A WARNING Do not perform maintenance or assembly procedures with engine running. Parts Required: PAS or SRM-SB Power Head w/Shaft & Coupling, Metal Shield, Bracket, Barrier Bar power head shafT/aTTaChmenT lower shafT assembly 1. Set Power Head/Shaft Assembly on a level surface. 2. Pull locator pin (A) and rotate counter clockwise 1/4 turn to lock out p...

Scarica la tua

Per scaricare, digitare 2 cifre :