5-58 ADAM 4000 Series User’s Manual 4011, 4011D, 4012 Chapter 5 @AARE Name Read Event Counter command Description The addressed module is instructed to return its event counter value. Syntax @AARE(cr) @ is a delimiter character. AA (range 00-FF) represents the 2-character hexadecimal address of an analog input module. RE is the Reads Event Counter command. (cr) represents terminating character, carriage return (0Dh). Response !AA(data)(cr) if the command was valid. There is no response if the mo

SOM-A2552 series are an innovate platform architecture of WinCE.NET-ready complete functional system in a low profit module with SODIMM 200-pin unified I/O ready bus interface that is designed to fit into application-specified User Solution Board (CSB) with easy, risk-less, robust, fast implementation approach. Dual expansion interface and Pre-select Embedded OS also are well integrated on module. OS Board Support Package (BSP) and advantech own-develop system utility & tools are also supported

Ethernet Data Gateway In this column, you will see all the found ADAM-4570/ADAM4571/ EDG-4504 devices are listed when you use the configuration utility to auto-search ADAM-4570/ADAM-4571/EDG4504 devices. The specific number following each ADAM-4570/ ADAM-4571/EDG-4504 device is its MAC Address. The MAC Address is what helps the local system to identify and locate each Ethernet data gateway device. This MAC Address is already set before delivery from factory, hence no need for further configurati

The PCI-1784 satisfies both these needs by providing jumper JP2. Depending on the application, this capability may allow counter value and the isolated digital outputs to be "OFF" without requiring a complete shutdown of processes controlled by the card. Complete loss of power to the chip clears the chip memory. Thus, no matter how JP2 is set, if the power to the PCI-1784 is disconnected, the counter value and the isolated digital output initial power-on state will be "OFF". Board ID setting (SW

1.4.2 Device Drivers The Advantech Device Drivers software is included on the companion CD-ROM. Advantech’s Device Drivers features a complete I/O function library to help boost your application performance. The Advantech Device Drivers for Windows 2000/XP works seamlessly with development tools such as Visual C++, Visual Basic, Inprise C++ Builder, and Inprise Delphi. USB-4761 User Manual 6 1.5 Device Driver Programming This section will provide a roadmap to demonstrate how to build an applicat

The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. However, the original manufacturer assumes no responsibility for its use, nor for any infringements upon the rights o

THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A CONTROLLED ENVIRONMENT. v Safety Precaution - Static Electricity Follow these simple precautions to protect yourself from harm and the products from damage. 1. To avoid electrical shock, always disconnect the power from your PC chassis before you work on it. Don't touch any components on the CPU card or other cards while the PC is on. 2. Disconnect power before making any configuration changes. The sudden rush of power as you con

True is P2P enabling. False is P2P disabling. • Admin Edge: The port directly connected to end stations won’t create bridging loop in the network. To configure the port as an edge port, set the port to “True” status. • Admin Non Stp: The port includes the STP mathematic calculation. True is not including STP mathematic calculation. False is including the STP mathematic calculation. • Click Apply . Figure 3.41: RSTP Port Configuration interface 73 Chapter3 SNMP Configuration Simple Network Manage

For the external test, you will need to connect each port to a loopback tester. The test 4 ADAM-4570/ADAM-4571/EDG-4504 User’s Manual is divided into two parts: Signal test and Communication Parameters test. If the results are OK, users can be sure the communication quality between host PC and ADAM-4570/ 4571 is OK. Easy to maintain by downloading firmware remotely Advantech continually upgrades ADAM-4570/ADAM-4571/ EDG-4504’s firmware to keep pace with the ever-expanding world of computing. You

The time limitation (seconds) is from 1 ~ 4095 46 ADAM-4570/ADAM-4571/EDG-4504 User’s Manual 3.2.5 Security Configuration Figure 3-9 Security configuration Only configure the authorized IP This option is enabled in order to protect all configuration settings from being changed inadvertently. Allow any IP to access If this option is enabled, any PC can access data from this ADAM-4570/ADAM-4571/EDG-4504. The specified IP which can access If you do not want many PCs to have the access right, you ca