■ (ID CiD BELT SANDER Operation and Safety Notes Translation of original operation manual PBS 600 Al BANDSCHLEIFER Bedienungs- und Sicherheitshinweise Originalbetriebsanleitung (dF) (GB> (AT) (JL> Сен)

Caution – electric shock! Dangerous electric current – danger to life! Keep children and other unauthorised personnel at a safe distance when using electrical tools. Explosive material! Keep the device away from rain or moisture. Water entering an electrical device increases the risk of electric shock. V~ Voltage Damaged appliances, power cables and power plugs mean potentially fatal risks from electric shock. Regularly check the condition of the appliance, the power cables and the power plugs.

J When undertaking prolonged sanding of wood, and in particular when working on materials that give rise to dusts that are hazardous to health, the sander must be connected to a suitable external dust extraction device. J Ensure that there is adequate ventilation when working on plastic, paint, varnish etc. J The belt sander is designed for the dry sanding of large surfaces of wood, plastic, metal and plaster and painted surfaces. The device is to be used for dry sanding only. J Do not sand mate

To help you do this please read the accompanying operating instructions. Keep these instructions in a safe place. If you pass the device on to anyone else, please ensure that you also pass on all the documentation. • Proper use The belt sander is designed for dry sanding of large surfaces of wood, plastic, metal, plaster and painted surfaces. The device may only be used for dry sanding. Always use a sanding belt and grade of grit suitable for the particular surface you are sanding. The speed

J Provide for sufficient ventilation when working plastics, varnishes and paints. J Do not soak materials or surfaces to be worked with liquids containing solvents. The heat generated during sanding can give rise to vapours that are toxic or hazardous to health. J Avoid sanding lead-based paints or other materials that are hazardous to health. J Material containing asbestos may not be worked. Asbestos is considered to be a carcinogen. J Avoid contact with the moving sanding sheet. J Use the appl

C). • Rotating the backing plate HWARNIN ¡G! Always pull the mains plug is out of the socket before doing any work on the device. □ Rotate the backing plate into the desired position (see Fig. D). Sanding and surfaces: The sanding output and the quality of the surface finish are determined by the grade of grit on the sanding sheet. □ Always use sanding sheets with grades that are suitable for the particular surface you are sanding. 10 GB/IE III PARKSIDE Preparing for use / Maintenance a

To help you do this please read the accompanying operating instructions. Keep these instructions in a safe place. If you pass the device on to anyone else, please ensure that you also pass on all the documentation. • Proper use The cordless multi-grinder is intended to be used for drilling, milling, engraving, polishing, cleaning, grinding, cutting and sawing wood, metal, plastic, ceramics or stone in dry environments. Any other use or modification to the drill / grinder shall be considered

The use of tools and accessories other than those recommended in the operating instructions could lead to an increased risk of personal injury for you. Q Operation Q Operation Take note of the mains voltage! The voltage must agree with the information on the type plate of the appliance (appliances that are designated as 230 V can also be connected to 220 V). Q Switching On and Off Switching on intermittent function: j Press the ON/OFF switch 1 . Switching off intermittent function: j Release the

Workplace safety.....................................................................................................Page 7 2. Electrical safety ........................................................................................................Page 7 3. Personal safety .........................................................................................................Page 8 4.Careful handling and use of electrical power tools..............................................Page 8 Safety a

An accessory rotating faster than its permitted speed could disintegrate or fly off. e) The external diameter and the thickness of the attachment must be compatible with the dimensions of your electrical power tool. Attachments that are not dimensionally compatible cannot be adequately guarded or controlled. f) Grinding discs, flanges, grinding wheels or other accessories must fit exactly on to the spindle of your electrical power tool. Attachments that do not exactly fit on the spindle turn u