Produttore : Yamaha File Size : 54.59 kb File Nome : Lingua di insegnamento:

Vai a scaricare

[7EH] . [XnH] . [09H] . [01H] . [F7H] F0H = Exclusive status 7EH = Universal Non-Realtime 7FH = ID of target device 09H = Sub-ID #1=General MIDI Message 01H = Sub-ID #2=General MIDI On F7H = End of Exclusive or F0H = Exclusive status 7EH = Universal Non-Realtime XnH = When received, n=0~F. X = don’t care 09H = Sub-ID #1=General MIDI Message 01H = Sub-ID #2=General MIDI On F7H = End of Exclusive When the General MIDI mode ON message is received, the MIDI system will be reset to its default settings. This message requires approximately 50ms to execute, so sufficient time should be allowed before the next message is sent. YDP-160/140 Data List / Daten-Liste / Liste des donnees / Lista de datos 3 8. SYSTEM EXCLUSIVE MESSAGES (XG Standard) (1) XG Native Parameter Change Data format: [F0H] . [43H] . [1nH] . [4CH] . [hhH] . [mmH] . [llH] . [ddH] . [F7H] F0H = Exclusive status 43H = YAMAHA ID 1nH = When received, n=0~F. When transmitted, n=0. 4CH = Model ID of XG hhH = Address High mmH = Address Mid llH = Address Low ddH = Data | F7H = End of Exclusive Data size must match parameter size (2 or 4 bytes). When the XG System On message is received, the MIDI sys tem will be reset to its default settings. The message requires approximately 50ms to execute, so sufficient time should be allowed before the next message is sent. (2) XG Native Bulk Data (reception only) Data format: [F0H] . [43H] . [0nH] . [4CH] . [aaH] . [bbH] . [hhH] . [mmH] . [llH] . [ddH] ..... [ccH] . [F7H] F0H = Exclusive status 43H = YAMAHA ID 0nH = When received, n=0~F. When transmitted, n=0. 4CH = Model ID of XG aaH = ByteCount bbH = ByteCount hhH = Address High mmH = Address Mid llH = Address Low ddH = Data | | | | ccH = Check sum F7H = End of Exclusive • Receipt of the XG SYSTEM ON message causes reinitialization of relevant parameters and Control Change values. Allow sufficient time for processing to execute (about 50 msec) before sending this instrument another message. • XG Native Parameter Change message may contain two or four bytes of parameter data (depending on the parameter size). •For information about the Address and Byte Count values, refer to Table 1 below. Note that the table’s Total Size value gives the size of a bulk block. Only the top address of the block (00H, 00H, 00H) is valid as a bulk data address. 9. SYSTEM EXCLUSIVE MESSAGES (Digital Piano MIDI Format) Data format: [F0H] . [43H] . [73H] . [xxH] . [nnH] . [F7H] F0H = Exclusive status 43H = Yamaha ID 73H = Digital Piano ID 01H = Product ID (digital piano common) xxH = Substatus nn Control 02H Internal MIDI clock 03H External MIDI clock 06H Bulk Data (the bulk data follows 06H) F7H = End of Exclusive 10. SYSTEM EXCLUSIVE MESSAGES (Others) Data format: [F0H] . [43H] . [1nH] . [27H] . [30H] . [00H] . [00H] . [mmH] . [llH] . [ccH] . [F7H] Master Tuning (XG and last message priority) simultaneously changes the pitch of all channels. F0H = Exclusive Status 43H = Yamaha ID 1nH = When received, n=0~F. When transmitted, n=0. 27H = Model ID of TG100 30H = Sub ID 00H = 00H = mmH = Master Tune MSB llH = Master Tune LSB ccH = don’t care (under 7FH) F7H = End of Exclusive 4 YDP-160/140 Data List / Daten-Liste / Liste des donnees / Lista de datos

00 00 00 4 020C - 05F4(*1) MASTER TUNE -50 - +50[cent] 00 04 00 00 01 1st bit 3 - 0 . bit 15 - 12 400 02 2nd bit 3 - 0 . bit 11 - 8 03 3rd bit 3 - 0 . bit 7 - 4 4th bit 3 - 0 . bit 3 - 0 04 1 00 - 7F MASTER VOLUME 0 - 127 7F 7E 00 XG SYSTEM ON 00=XG sytem ON 7F 00 RESET ALL PARAMETERS 00=ON (receive only) TOTAL SIZE 07 *1: Values lower than 020CH select -50 cents. Values higher than 05F4H select +50 cents. MIDI Parameter Change table (EFFECT 1) Refer to the “Effect MIDI Map” for a complete list of Reverb, Chorus and Variation type numbers. Address (H) Size (H) Data (H) Parameter Description Default value (H) 02 01 00 2 00 - 7F REVERB TYPE MSB Refer to Effect MIDI Map 01(=HALL1) 00 - 7F REVERB TYPE LSB 00 : basic type 00 02 01 20 2 00 - 7F CHORUS TYPE MSB Refer to Effect MIDI Map 00(=Effect off) 00 - 7F CHORUS TYPE LSB 00 : basic type 00 • “VARIATION” refers to the EFFECT on the panel. MIDI Parameter Change table (MULTI PART) Address (H) Size (H) Data (H) Parameter Description Default value (H) 08 nn 11 1 00 - 7F DRY LEVEL 0 - 127 7F 08 nn 0C 1 00 - 7F VELOCITY SENSE DEPTH 0 - 127 40 08 nn 0D 1 00 - 7F VELOCITY SENSE OFFSET 0 - 127 40 nn = Part Number • Effect MIDI Map REVERB MSB LSB ROOM 02H 10H HALL 1 01H 10H HALL 2 01H 11H STAGE 03H 10H OFF 00H 00H EFFECT MSB LSB CHORUS 42H 10H PHASER 48H 10H TREMOLO 46H 10H ROTARY SP 47H 10H OFF 00H 00H YDP-160/140 Data List / Daten-Liste / Liste des donnees / Lista de datos 5 YAMAHA [ Digital Piano ] Date :26-DEC-2007 Model YDP-160/140 MIDI Implementation Chart Version : 1.0 Function... Transmitted Recognized Remarks Basic Default Channel Changed 1-16 1-16 1-16 1-16 DefaultMode Messages Altered 3 x ************** 3 x x Note Number : True voice 0-127 ************** 0-127 ...

Questo manuale è adatto anche per i modelli :
sintetizzatori / pianoforte - YDP-160 (54.59 kb)

Scarica la tua