Audio Settings Setting the Volume Set the required volume level using the . buttons on the remote control of the receiver. A bar indicator is displayed on the screen to show the set volume. Muting Press . to mute the sound. “Sound off” is displayed. Press the button again to restore the sound. Stereo and Two-Channel Sound Playback Use the yellow . button to open the Audio menu for sound and language selection, where you can make the desired settings, e.g. subtitles, language selection (soundtrac

To help you understand particular specialist terms that cannot be translated, we have added a short glossary at the end of the manual. The power switch is an environmentally friendly feature. If you will not be using your receiver for a longer period, you should therefore use the power switch to disconnect it from the power supply to save energy. For shorter breaks, you can switch the receiver to standby on the remote control, which uses only a minimal amount of energy. We wish you good receptio

To help you understand particular specialist terms that cannot be translated, we have added a short glossary at the end of the manual. The power switch is an environmentally friendly feature. If you will not be using your receiver for an extended period, you should use the power switch to disconnect it from the power supply and save energy. For shorter breaks, you can use the remote control to switch the receiver to standby, which uses only a minimal amount of energy. We wish you good reception

To help you understand particular specialist terms that cannot be translated, we have added a short glossary at the end of the manual. The power switch is an environmentally friendly feature. If you will not be watching the television for a longer period, you should therefore disconnect your equipment from the power supply to save energy. For shorter breaks, you can switch the equipment to standby on the remote control, which uses only a minimal amount of energy. We hope you will have a good rec

DVB-T is a television standard which will provide optimum reception, without ghosts or any other disadvantages conventional terrestrial television brings about, even if you merely use a suitable indoor antenna. We have composed the instructions as plain and short as possible. In order to give you an understanding of certain terms, we have compiled an encyclopaedia at the end of this manual. The power switch of the receiver satisfies the eco-friendliness aspects. We therefore would ask you to dis

Measuring the current level The following values are displayed in the display: Channel: S16 (special channel) Frequency: 266.25 MHz Analogue reception: A Current level: 79.5 dB.V An „A“ in front of the level display means, that the MSK 33 has be set to analogue level measurement. Even after exiting the menu, the MSK 33 stays set to ANALOGUE reception. For level measurement of digital TV signals, it can be switched over the digital reception in the DIGITAL menu (refer to the respective section).

The Kathrein-Werke KG has made every effort to ensure that the data and descriptions in this manual are accurate and complete. We reserve the right to make changes to this manual without prior notice. This particularly applies to modifications required for technical improvement. We appreciate your recommendations and improvement suggestions. Publications, copies and print-outs as well as electrical distribution of this manual in full or in part is only allowed with written authorisation from the

To spend only a minimum of electricity in case you are absent for any length of time, please turn off the receiver with the power switch. We trust your receiver will always provide high-quality reception and wish you much pleasure with it. The KATHREIN Euroline. team Important notes If you have – against our expectations - any trouble with your receiver, please contact your local dealer. Important notes The programme allocation of the satellites and the transponders is changed from time to time.

4 Front panel controls and displays .................................................................................................................. 4 Rear panel controls and connections............................................................................................................. 4 Remote control handset................................................................................................................................. 5 Remote control handset keys ..................

Read these notes carefully before putting the unit into operation. Extended absence / thunderstorms Always switch the unit off via its mains switch (at front left on unit) during periods of extended absence or at the onset of thunderstorms. This also applies to any other equipment that is connected to the receiver. However, take into account any possible timer programming and switch the unit on again in good time prior to the recording time. Mains lead Make certain that the mains lead (power sup