It refers to the highest with EEC 92/75 standards. temperature for each wash programme. 36 electrolux installation Installation Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. After removing all the packaging, carefully lay machine on it’s back to remove the polystyrene base from the bottom. 2. Remove the power supply cable and the drain

load kg 3 TIME MANAGER ** Red. load kg 1,5 SPIN REDUCTION/NO Prewash/Main wash Synthetics + Synthetic or mixed SPIN/RINSE HOLD, Rinses Prewash fabrics (normally EASY IRON*, EXTRA Short spin 60° - Cold soiled items) RINSE, Max. load kg 3 TIME MANAGER ** Red. load kg 1,5 Main wash NO SPIN/RINSE HOLD, Rinses Delicates Short spin Delicate fabrics EXTRA RINSE 40° - Cold Max. load kg 3 TIME MANAGER ** Red. load kg 1,5 Drain and long spin Separate spin for at the maximum Spin SPIN REDUCTION speed Max.

Remove the drawer by pressing the catch downwards and by pulling it out. Flush it out under a tap, to remove any traces of accumulated powder. To aid cleaning, the top part of the additive compartment should be removed. Cleaning the drawer recess Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess. Replace the drawer and run the rinse programme without any clothes in the drum. Cleaning

Position O to Reset programme/ Switching OFF of the machine. At the end of the programme the selector dial must be turned to position O, to switch the machine off. Attention! If you turn the programme selector dial to another programme when the machine is working, the lights of the programme progress display start to flash. The machine will not perform the new selected programme. Select the required temperature Turn the temperature selector dial to select the washing temperature. Maximum tempera

Thinking of you. Обменяйтесь с нами своими мыслями на СОДЕРЖАНИЕ Сведения по технике безопасности Рекомендации по сушке 18 2 Программы стирки 19 Описание изделия 4 Программы сушки 22 Панель управления 6 Уход и очистка 22 Первое использование 9 Что делать, если ... 27 Персонализация 9 Технические данные 30 Ежедневное использование 10 Показатели потребления 30 Эксплуатация - сушка 13 Установка 31 Эксплуатация - стирка и сушка 14 Подключение к электросети 35 Полезные советы 15 Охрана

You must first select the GTP-870HD before you can access the Setup menu. • Setup - Press the Setup button to display and exit the Setup menu. • Arrows - Press the -*•/▼ buttons to move the selection arrow up or down the list of menu items. Press the i /► buttons to step through all available options for the selected menu item. • Select - Press the Select button to confirm your menu selections. r 1 INPUT CONFIG ► SOURCE VIDEO 1 INPUT COAXIAL 1 EXT 7.1 OFF MAIN TRIG ON MODE STEREO VID

8 Unpacking Washer Removing shipping hardware Installing hole plugs NOTE Rubber expansion material on spacers may need time to relax before they can be easily pulled through shipping hole. IMPORTANT Save all shipping bolts and spacers for future use. If the washer is to be transported at a later date, the shipping hardware must be reinstalled to help prevent shipping damage. 5 SPACERS 5 SPACERS 5 P CLAMPS 5 P CLAMPS 7 HOLE PLUGS (IN BAG) 1 SHIPPING FORK 1 SHIPPING FORK Remove all of the followin

We recommend that a maintenance wash be performed on a regular basis. To run a maintenance wash: • The drum should be empty of laundry. • Select the hottest cotton wash programme. • Use a normal measure of detergent, must be a powder with biological properties. External cleaning Clean the exterior cabinet of the appliance with soap and water only, and then dry thoroughly. Important: do not use methylated spirits, solvents or similar products to clean the cabinet. Detergent dispenser drawer The d

.13 Защита стиральной машины от замерзания..........................................13 ЕСЛИ СТИРАЛЬНАЯ МАШИНА НЕ РАБОТАЕТ 14 ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ 15 ТЕХНИЧЕСКОЕ ОБСЛУЖИВАНИЕ 15 Техническое обслуживание и запчасти ..............................................15 УСТАНОВКА СТИРАЛЬНОЙ МАШИНЫ 16-17 Выравнивание стиральной машины .................................................16 Подача воды.....................................................................16 Слив воды ...............

4 Дозатор моющих средств ...........................4 Панель управления .....................................4 Как провести стирку?....................................5 Загрузка белья ...........................................5 Дозирование моющего средства ................5 Выбор подходящей программы...................5 Выбор скорости вращения барабана при отжиме..................................................5 Выбор нужных дополнительных функций.....5 Опция «Отсрочка запуска» .....