3. Connect one coaxial cable from OUT on the RF splitter to ANT-1 MAIN on the TV back panel. 4. Connect one coaxial cable from OUT on the cable box to ANTENNA IN on the VCR back panel. 5. Connect one coaxial cable from ANTENNA OUT on the VCR back panel to ANT-2 AUX on the TV back panel (optional). 6. To use the TV speakers with the VCR, connect a set of audio cables from AUDIO OUT on the VCR back panel to INPUT-1 AUDIO-LEFT (MONO) and AUDIO-RIGHT on the TV back panel. The red cable connects to the R (right) channel and the white cable connects to the L (left) channel. If your VCR is mono (non-stereo), connect only the white (left) cable. 7. Connect either an S-Video or Video cable from VIDEO OUT on the VCR back panel to INPUT 1 VIDEO on the TV back panel. Only one type of video cable should be connected. S-Video is recommended, if available. 8. For NetCommand® controlled recordings, connect a set of audio cables from AUDIO IN on the VCR back panel to MONITOR OUTPUT AUDIO/VIDEO 1 AUDIO-LEFT (MONO) and AUDIO-RIGHT on the TV back panel. The red cable connects to the R (right) channel and the white cable connects to the L (left) channel. 9. Complete the NetCommand controlled recordings connections by connecting a Video cable from VIDEO IN on the VCR back panel to MONITOR OUTPUT AUDIO/VIDEO 1 on the TV back panel. Note: NetCommand® will assume your VCR is connected to inputs as shown on this page. If you use any other inputs for your VCR or add a second VCR, this change must match in the NetCommand system. See Edit NetCommand... in Chapter 3 for more information. IREMITTERNetCommandRINPUT-1AUDIO2AUDIO/VIDEO1AUDIOL(MONO)RINPUT-2DIGITALAUDIOPCVGA/SVGA/XGA/ 720p60HzPC- AUDIOPC- INPUTM-LINKCONTROL/ RS-232CHDMIM-LINKIEEE1394INPUT/OUTPUTVIDEOS-VIDEOMONITOROUTPUTLR DTV/ CABLE/ VHF/ UHFANT-1MAINANT-2AUX 4.9.6. DTV/ CABLE/ VHF/ UHFANT-2AUXANT-1MAIN2. INOUTOUTTWOWAYSPLITTER IncomingCable1.2.3. INPUT-1AUDIOL(MONO)RVIDEOS-VIDEOTVbackpanelsectionAUDIO/VIDEO1MONITOROUTPUT Attachonlyonecabletype S-Videorecommendedifavailable7. ..............4.6. VCRbackpanelIfyourVCRhasavideochannelorRFON/OFFswitch,setittoOFF. 5.5.7.7.CableBoxbackpanelsectionINOUT 3.8.8.9. DVIAnalogAudioLR Figure 6. Connecting a VCR to a Cable Box Connecting an A/V Receiver or Stereo System or a Satellite Receiver or Other Device with S-Video Satellite Receiver or Other Device with S-Video Figure 8 An S-Video cable and audio cables are required. These are not included with the TV. 1. Connect an S-Video cable from VIDEO OUT on the satellite receiver back panel to INPUT-2 VIDEO on the TV back panel. 2. Connect a set of audio cables from AUDIO OUT on the satellite receiver back panel to INPUT-2 AUDIO, on the TV back panel. The red cable connects to the R (right) channel and the white cable connects to the L (left) channel. Note: Refer to the Satellite Receiver Owner’s Guide for Dish Antenna connections. A/V Receiver or Stereo System Figure 7 A digital audio cable and stereo audio cables are required. The digital audio cable is provided. The stereo audio cables are not included with the TV. 1. Connect a set of stereo audio cables from OUTPUT AUDIO 2 on the TV back panel to the TV AUDIO INPUT on the back of the A/V receiver. The red cable connects to the R (right) channel and the white cable connects to the L (left) channel. To connect a digital A/V receiver with Dolby® Digital surround sound: 2. Connect one end of the digital audio cable supplied with the TV to DIGITAL AUDIO on the back of the TV. Connect the other end to the COAXIAL DIGITAL INPUT on the back of the A/V receiver. Check A/V receiver’s Owner’s Guide for information concerning the use of the digital input and switching between the digital sound and analog stereo sound from the TV. IREMITTERNetCommandRINPUT-1AUDIO2AUDIO/VIDEO1AUDIOL(MONO)RINPUT-2DIGITALAUDIOPCVGA/SVGA/XGA/ 720p60HzPC- AUDIOPC- INPUTM-LINKCONTROL/ RS-232CHDMIM-LINKIEEE1394INPUT/OUTPUTVIDEOS-VIDEOMONITOROUTPUTLR DTV/ CABLE/ VHF/ UHFANT-2AUXANT-1MAINAUDIOL(MONO)RINPUT-22. TVbackpanelsection1. (Y/C)LRLR12VIDEOOUTAUDIOOUTAUDIOINAnyS-VideoDeviceWhiteRed 1.2. RedWhite DVIAnalogAudioLR ININININININININOUTOUTOUTOUTAUXCDTAPE1TAPE2VCR1VCR2TVDVDMONITORVCR1VCR2TVDVDMONITORVCR1VCR2TVDVDOUTOUTININININININININOUTOUTOUTOUTCENTERSUBWOOFERFRONTSUR. RECSOURCELINEOUTPREOUTSURROUNDSPEAKERS........MIN... FRONTSPEAKERS-A........MIN... FRONTSPEAKERS-B........MIN... CENTER ......MIN... LLLLRLRRRTHISDEVICECOMPLIESWITHPART15OFTHEFCCRULES.OPERATIONISSUBJECTTOTHEFOLLOWINGTWOCONDITIONS:(1)THISDEVICEMAYNOTCAUSEHARMFULINTERFERENCEAND(2)THISDEVICEMUSTACCEPTANYINTERFERENCERECEIVED,INCLUDINGINTERFERENCETHATMAYCAUSEUNDESIREDOPERATION. MANUFACTUREDUNDERLICENSEFROMDOLBYLABORATORIESLICENSINGCORPORATION."DOLBY","PROLOGIC"ANDTHEDOUBLE-DSYMBOLARETRADEMARKSOFDOLBYLABORATORIESCORPORATION. COPYRIGHT1992DOLBYLABORATORIES,INC.ALLRIGHTSRESERVEDINPUT-1(OPTICAL) INPUT-2(COAXIAL) INPUT-3(COAXIAL) DIGITALAUDIOSWITCHEDUNSWITCHEDAC120V-60HzTOTAL100W,0.9AMAXACOUTLETSMITSUBISHIAUDIO/VIDEORE...

Questo manuale è adatto anche per i modelli :
TV - WD-52825 (5.33 mb)
TV - WD-62825 (5.33 mb)
TV - WD-52825 (5.33 mb)
TV - WD-62825 (5.33 mb)