valutazioni - 3, GPA: 5
(
)
)
|
Facilità d'uso
Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at “Yes.” When Custom is selected, the saved scale is used. Reset ................. Reset the all adjusted values. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at “Yes.” For zooming in and out the images Digital zoom + Select Digital zoom +. The On-Screen Menu disappears and “D. zoom +” appears. Press the SELECT button to expand the image size. Use the Point ^Ў<> buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM ^ button on the remote control. Digital zoom – Select Digital zoom –. The On-Screen Menu disappears and “D. zoom –” appears. Press the SELECT button to compress image size. The projected image can be also compressed by pressing the D.ZOOM Ў button on the remote control. To exit the Digital zoom +/– mode, press any button except the D.ZOOM ^Ў buttons, SELECT, and Point buttons. To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see pages 29-30) again, or adjust the screen size with the D.ZOOM ^Ўbuttons. Press the SELECT button at Common or Reset, to display a confirmation box. .Notes: • When no signal is detected, “Normal” is set automatically and the Aspect dialog box disappears. • The adjustable range for Scale H/V and Position H/V is limited depending on the input signal. Remote Control D ZOOM + button POINT buttons SELECT button D ZOOM - button .Notes: • The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used (p.34). • The minimum compression ratio is limited depending on the input signal, when the Keystone function is working or when the custom is selected for the screen size. • True, Full, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.31). • Digital zoom +/- cannot be selected when Full or True is selected. Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. 1 Input Source Selection (Video, S-video) Video Input Computer 1 (Analog) Video Computer INPUT button VIDEO button wired Top Control INPUT button Computer 1 (Digital) Remote Control Direct Operation Menu Operation Press the MENU button to display the On-Screen Menu. Use the Point <> buttons to move the red frame pointer to the Input Menu icon. wireless Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. 1 Input Source Selection (Video, S-video) Video Input Computer 1 (Analog) Video Computer INPUT button VIDEO button wired Top Control INPUT button Computer 1 (Digital) Remote Control Direct Operation Menu Operation Press the MENU button to display the On-Screen Menu. Use the Point <> buttons to move the red frame pointer to the Input Menu icon. wireless Use the Point^Ў buttons to move the red arrow Input Menu icon pointer to Video and then press the SELECT button to Input Menu display the Source Select Menu. Move the pointer to the desired source and then press 3 the SELECT button. Auto When selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order: 1. S-video 2. Video Video S-video VIDEO Source Select Menu (VIDEO) When video input signal is connected to the Move the pointer to the source VIDEO jack, select Video. that you want to select and press the SELECT button. When video input signal is connected to the SVIDEO jack, select S-video. .Notes: • Wired and Wireless are for the Network function. See the owner’s manual “Network Set-up and Operation” . • When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.50). • When Monitor out is selected in the Terminal function (p.50), Computer 2 is not displayed. Move the pointer to Video and press the SELECT button. 39 Video Input Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below. 1 Input Source Selection (Component, RGB Scart 1-pin) Computer 1 (Analog) Video Computer COMPUTER button wired INPUT button Computer 1 (Digital) Remote Control Computer 1 (Analog) Computer Computer 1 (Digital) Direct Operation Menu Operation Press the MENU button to display the On-Screen Top Control wireless Video Input Choose Computer 2 by pressing the INPUT button on the top c...
Questo manuale è adatto anche per i modelli :TV - LC-XB33N (6.23 mb)