valutazioni - 3, GPA: 3.7
(
)
)
|
Facilità d'uso
Problem Solution No picture (screen is dark), no sound. • Plug the TV set in. • Press the button on the front of the TV set. • If the indicator is on in red colour, press TV button on the remote control. • Check the aerial connection. • Check that the selected video source is on. • Turn the TV set off for 3 or 4 seconds and then turn it on again using the button on the front of the TV set. Poor or no picture (screen is dark), • Using the MENU system, select the Picture Adjustment menu. Adjust the but good sound. brightness, contrast and colour balance levels. button repeatedly on the remote control until the RGB Poor picture quality when watching a • Press the 1 or 2 is displayed on the screen. RGB video source. symbol +/-button on the remote control. Good picture, no sound • Press the • Check that "Main" speaker is selected in the "Features" menu. GB No colour on colour programmes • Using the MENU system, select the Picture Adjustment menu. Adjust the colour balance. Distorted picture when changing • Turn off any equipment connected to the Scart connectors on the rear of programmes or selecting teletext the TV set. Striped picture • Adjust the RF Attenuator (ATT). For details, please refer to the section "Using the Further Programme Preset function". Noisy picture when viewing TV channel • Adjust Fine Tuning (AFT) to obtain better picture reception. For details, please refer to the section "Using the Further Programme Preset function" • Using the menu system, select the “Picture Adjustment” menu and set “Noise Reduction” to “Auto”. No unscrambling or unstable picture • Using the menu system, select the “Features” menu and set “AV3 Output” whilst viewing a scrambled channel with to “TV” a decoder connected through the Scart connector :3/q3 (SMARTLINK) Remote control does not function • Check that the Media Selector on the remote control is set to the device you are using (VCR, TV or DVD). • If the remote control does not operate the VCR or DVD even when the Media Selector has been set correctly. Enter the necessary code set as explained on “Remote Controll Configuratio for VCR/DVD” chapter of this instruction manual. • Replace the batteries. on the TVset • Replace the lamp. For details please refer to the section “Replace the flashes. Lamp” The lamp indicator on the TVset • If you are changing the lamp without disconnecting the power cord, the flashes. standby indicator flashes. To continue changing the lamp, disconnect the power cord and wait for at least 30 minutes to allow the lamp to cool. The standby indicator • Check that the lamp cover is tightly attached. • If you are not changing the lamp but the standby indicator flashes, contact your nearest Sony service centre. • If you continue to have these problems, have your TV serviced by qualified personnel. • NEVER open the casing yourself. Additional Information Увод Благодаря Ви за изборът на този мoдeл SONY “Grand Wega”. Преди да използвате aпapaтa, прочетете внимателно тези инструкции и ги запазете за бъдещи изяснения. • Символи използвувани в тези инструкции: Бутоните на дистанционното управление, маркирани • Важна информация.• с бяло, показват кои бутони трябва да бъдат • Информация за функциите. натиснати за изпълнението на различни инструкции. •1,2.. Ред за следване на инструкциите. • Информация за резултатът от инструкциите. Съдържание Увод............................................................................................................................................................................................................ 3 Техника на безопасност ........................................................................................................................................................................... 4 Основно описание Проверка на доставените принадлежности............................................................................................................................... 5 Основно описание на бутоните на aпapaтa ............................................................................................................................................. 5 Основно описание на бутоните на дистанционнотo yпpавление....................................................................................................... 6 Инсталиране Инсталиране на батериите в пулта за дистанционно управление................................................................................................... 7 Bключване на антената и видеoтo............................................................................................................................................................. 8 Зaкpeпвaнe нa aпapaтa нa cтeнa ................................................................................................................................................................ 8 Първоначално включване Включване на aпapaтa и автоматично настройване..............................................................................
Questo manuale è adatto anche per i modelli :TV - Grand Wega KF-42SX200K (73.81 mb)
TV - KF-50SX200K (73.81 mb)