|
Facilità d'uso
Select “Connection test” and press OK (It takes a while to cancel the test.) Displayed Connection test screen This setting is performed only when “Wireless (WiFi)” is selected in “Network connection” above. ¦Displayed “Current settings and status” screen (If connected with Wireless LAN Adapter) You can confirm the AP connection status. (SSID/Wireless type/Security type/Encryption type/Connection status /Signal strength) Connection testCheck Ethernet cable connectionValidate IP address Check for IP address duplication Check connection to the InternetCheck communication with VIERA Connect server Test in progress... Press “Wireless network” When you change “Wireless network” -->Press “No” Complete Connection testSuccess-->Completion screen is displayed. Error-->Follow the directions on screen to complete the setting. If you perform the Proxy settings, check the Proxy addressand the Proxy port number. Wireless network SSID : Wireless type : Security type: Encryption type : Connection status : Signal strength : Connect using these settings? Yes No See “Sets / Changes wireless network setting” on p. 41 select and follow the directions on screen to complete the setting. OK You need to be “Connected” to use network devices. Please set Access point settings to “Connected”. (example) Network connection Select Network type (Ethernet cable/Wireless (WiFi)) Wireless network (Confirm Current settings and status) Wireless network (Wireless network s ¦Sets / Changes wireless network setting Press “Wireless network” and display setetting) ting screen Follow the directions on screen to complWireless network WPS (Wi-Fi Protected Setup using push button) Please choose connection method: WPS (Wi-Fi Protected Setup using PIN number) Search for wireless networks Manual settings select OK * Wi-Fi Protected Setup is an easy setting of the Wi-FiAlliance’s certification .For more details on setting of an Access point, plerefer to operating manual for the Access point. ete the setting ase IP address/DNS settings Select “IP/DNS setting mode” and set to “Automatic” (When IP/DNS automatic acquisition in DHCP can be used) Menu IP address/DNS settings IP setting mode IP address 192.168.0.5 Subnet mask 255.255.255.0 Default gateway 192.168.0.254 DNS setting mode Automatic DNS 192.168.0.20 Automatic The acquired address is displayed. select OK Each IP address is acquired automaticallyIf you are using a broadband router, IP automatic acquisition in DHCP can be used under normal circumstances. If you are not sure, check with the pewho installed the equipment, or check the instructioneach device. rson s for Proxy setting Search for Wireless networks: Select an access point from the ones searched for automatically, and configure the settings as instructed on the screen. WPS (Wi-Fi Protected Setup* using push button): You can connect the Access point to press the buttons. WPS (Wi-Fi Protected Setup using PIN number): Set the PIN code that is displayed on the TV on the Access point. Manual settings: Manually set SSID, Security type, and Encryption type to match the settings of the Access point to which to connect. .When connecting by 11n (5 GHz), select “AES” as the Encryption type for the wireless LAN. ¦Manual setting Select “IP/DNS setting mode” and set to “Manual” Select the item and press OK Check the specifications of the broadband router and enter each IP address. Or Enter each IP address as was specified by the provider Using IP address 0 . 0 . 0 . 0 Set only if specified by the provider. It is not required for normal household use. Select “Proxy setting” ¦Proxy address Menu IP address/DNS settings IP setting mode IP address 192.168.0.5 AutomaticSubnet mask 255.255.255.0 Default gateway 192.168.0.254 DNS setting mode Automatic DNS 192.168.0.20 Proxy setting This is the address of the relay server that is connected select to the target server instead of the browser and sends data to the browser. Setting is only required if specified OK by the provider. ¦Proxy port This number is specified by the provider together with the Proxy address. Select item and press OK select OK Menu Proxy setting Proxy address 0Proxy port Advanced Enter address or port number and press OK .Entering characters (p. 19) Network link ¦Edit the name of this TV Sets your favorite name for this TV. This name will be used to display the name of this TV on the screen of the other Network compatible equipment. Select “VIERA network name” Menu Network link VIERA network name DLNA remote control Enable VIERA DLNA remote volume control Enable Network remote control Enable select OK Edit the name and press OKEntering characters (p. 19) ¦Switches DLNA remote control (Disable/Enable) Switches DLNA remote control “Disable” or “Enable” select DLNA remote control Enable ¦Volume setting in DMR operation (Disable/Enable) Sets volume setting in DMR operation • Available only when “Enable” is selected in “DLNA remote control” select DLNA remote volume control Enable ¦Switches Network rem...
Questo manuale è adatto anche per i modelli :TV - TCL32DT30 (3.27 mb)