valutazioni - 5, GPA: 4.4
(
)
)
|
Facilità d'uso
To adjust Colour, Red, Green, Blue and Reset, set Colour Space to Custom. ¦ White Balance: Adjust the colour temperature for a more natural picture. R-Offset/G-Offset/B-Offset: Adjust each colour’s (red, green, blue) darkness. R-Gain/G-Gain/B-Gain : Adjust each colour’s (red, green, blue) brightness. Reset: Resets the White Balance to it’s default settings. ¦ 10p White Balance (Off/On): Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness. . Available when the picture mode is set to Movie and when the external input is set to all input. . Some external devices may not support this function. Interval: Select interval to adjust. Red: Adjust the red level. Green: Adjust the green level. Blue: Adjust the blue level. Reset: Resets the 10p White Balance to its default settings. ¦ FleshTone: Emphasize pink “Flesh Tone.” ¦ Edge Enhancement (Off/On): Emphasize object boundaries. ¦ xvYCC (Off/On): Setting the xvYCC mode on increases detail and colour space when watching movies from an external device (e.g. DVD player) connected to the HDMI or Component IN jacks. . Available when the picture mode is set to Movie and when the external input is set to HDMI or Component. . Some external devices may not support this function. ¦ LED Motion Plus (Off/On): Removes drag from fast scenes with a lot of movement to provide a clear picture. 18 English Picture Options . In PC mode, you can only make changes to the ColourTone,Sizeand AutoProtectionTime. Picture Options Colour Tone : Normal > Size : Auto Wide Screen Mode : 16:9 Digital Noise Filter : Auto MPEG Noise Filter : Auto HDMI Black Level : Normal Film Mode : Off Ў U Move E Enter R Return ¦ ColourTone (Cool/Normal/Warm1/Warm2) . Warm1 or Warm2will be deactivated when the picture mode is Dynamic. . Settings can be adjusted and stored for each external device connected to an input on the TV. ¦ Size: Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time. Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio. P.SIZE 16:9 : Adjusts the picture size to 16:9 for DVDs or wide broadcasting. Wide Zoom: Magnifies the picture size more than 4:3. . Adjusts the Position by using ^, Ў buttons. Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size. . Adjusts the Position or Size by using ^, Ў button. 4:3 : The default setting for a movie or normal broadcasting. . Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention(screen burn) which are not covered by the warranty. Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted. . NOTE • Depending on the input source, the picture size options may vary. • The available items may differ depending on the selected mode. • In PC mode, only 16:9 and 4:3 modes can be adjusted. • Settings can be adjusted and stored for each external device connected to an input of the TV. • After selecting ScreenFitin HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Adjusts the Position or Size by using ^, Ў, <, > button. • If you use the ScreenFit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function. ¦ Screen Mode (16:9/Wide Zoom/Zoom/4:3): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size. . Not available in PC, Component or HDMI mode. ¦ Digital Noise Filter (Off/Low/Medium/High/Auto /AutoVisualisation): When the broadcast signal is weak, some static and ghosting may appear. Select one of the options until the best picture is displayed. AutoVisualisation: When changing analogue channels, displays the intensity of the current signal and defines the screen noise filter. . Only available for analogue channels. ¦ MPEG Noise Filter (Off/Low/Medium/High/ Auto): Reduces MPEG noise to provide improved picture quality. ¦ HDMI Black Level (Normal/Low): Selects the black level on the screen to adjust the screen depth. . Available only in HDMI mode (RGB signals). ¦ Film Mode (Off/Auto1/Auto2): Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality. . Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i). 03 Basic Features English 19 Basic Features ¦ Motion Plus (Off/Clear/Standard/Smooth/ Custom/Demo): Removes drag from fast scenes with a lot of movement to provide a clearer picture. . If noise occurs on the screen, please set up the MotionPlus to Off. If MotionPlusis Custom, you can set up the BlurReduction,Judder Reduction or Reset manually. . If MotionPlusis Demo, you can compare the difference of on and off modes. Blur Reduction: A...
Questo manuale è adatto anche per i modelli :TV - UE32C6000RW (20.25 mb)
TV - UE32C6005RW (20.25 mb)
TV - UE32C6200RS (20.25 mb)
TV - UE32C6500UW (20.25 mb)