valutazioni - 2, GPA: 3
(
)
)
|
Facilità d'uso
The speakers are making an inappropriate noise. • Check the cable connections. Make sure a video cable is not connected to an audio input. • For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion. 05 Other Information English 53 Other Information Issues Solutions and Explanations No Picture, No Video The TV won’t turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the TV. • Make sure the wall outlet is working. • Try pressing the POWERbutton on the TV to make sure the problem is not the remote. If the TV turns on, refer to “The remote control does not work” below. The TV turns off automatically. • Ensure the SleepTimeris set to Offin the Setupmenu. (p. 22) • If your PC is connected to the TV, check your PC power settings. • Make sure the AC power cord is plugged in securely to the wall outlet and the TV. • When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal. There is no picture/Video. • Check cable connections (remove and reconnect all cables connected to the TV and external devices). • Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV. • Make sure your connected devices are powered on. • Be sure to select the TV’s correct source by pressing the SOURCEbutton on the TV remote. RF(Cable/Antenna) Connection The TV is not receiving all channels. The picture is distorted: macro block error small block, dots, pixelization • Make sure the Antenna cable is connected securely. • Please try Plug&Play(Initial setup) to add available channels to the channel list. Go to MENU- Setup-Plug&Play(Initial setup) and wait for all available channels to be stored (p. 7). • Verify the Antenna is positioned correctly. • Compression of video contents may cause picture distortion, especially with fast moving pictures such as sports and action movies. • A low signal can cause picture distortion. This is not a TV issue. A “Mode Not Supported” message appears. • Set your PC’s output resolution and frequency so they match the resolutions supported by the TV. (p. 27) “PC” is always shown on the source list, even if a PC is not connected. • This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected. The video is OK but there is no audio. • If you are using a HDMI connection, check the audio output setting on your PC. PC Connection Network Connection (Depending on Models) Wireless network connection failed. • Samsung Wireless USB dongle is required to use a wireless network. • Make sure the Network Connection is set to Wireless(p. 30). • Make sure the TV is be connected to a wireless IP sharer (router). 54 English 05Issues Solutions and Explanations Issues Solutions and Explanations Others The picture won’t display in full screen. • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents. • Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV. • Adjust the picture size options on your external device or TV to full screen. The remote control does not work. • Replace the remote control batteries with the poles (+/–) in the right direction. • Clean the sensor’s transmission window on the remote. • Try pointing the remote directly at the TV from 5~6 feet away. The cable/set top box remote control doesn’t turn the TV on or off, or adjust the volume. • Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user manual for the SAMSUNG TV code. A “Mode Not Supported” message appears. • Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly. Refer to the resolution settings on page 27 of this manual. There is a plastic smell from the TV. • This smell is normal and will dissipate over time. The TV SignalInformationis unavailable in the Self Diagnostic Test menu. • This function is only available with digital channels from an Antenna / RF/Coax connection. (p. 26) The TV is tilted to the side. • Remove the base stand from the TV and reassemble it. There are difficulties assembling the stand base. • Make sure the TV is placed on a flat surface. It is necessary to use magnetized screw driver if you cannot remove the screws from the TV. The channel menu is greyed out. (unavailable) • The Channelmenu is only available when the TV source is selected. Your settings are lost after 30 minutes or every time the TV is turned off. • If the TV is in the Store Demomode, it will reset audio and picture settings every 30 minutes. Change the settings from Store Demomode to Home Usemode in the Plug&Play(Initial setup) procedure. Press the SOURCEbutton to select TVmode, and go to MENU> Setup> Plug&Play(Initial setup) > ENTERE(p. 7...
Questo manuale è adatto anche per i modelli :TV - UE32C6000RW (20.25 mb)
TV - UE32C6005RW (20.25 mb)
TV - UE32C6200RS (20.25 mb)
TV - UE32C6500UW (20.25 mb)