valutazioni - 4, GPA: 3.8
(
)
)
|
Facilità d'uso
¦ ¦ Network Status O O MENUm > Network > Network Status > ENTERE You can check the current network and Internet status. . . Setting the Wired Network for LED 5 series 32" and above, PDP 490 series N N For LED TVs, network function is not supported depending on the country. ¦ ¦ Wired Network Setup (Auto) N N When connecting the LAN Cable, the screen pop-up appears directly to set wired network. Use the Automatic Network Setup when connecting your TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps: How to set up automatically 1. Go to Network Settings screen. 2. Select Start. 3. The network connection screen appears, and network setting is done. Network Settings Network cable connected. Press Start to configure your wired network settings. If you want to connect to your wireless network, plug in a Samsung Wireless LAN Adapter. Start Cancel N N If it fails to set automatically, check the connection of LAN port. N N If you cannot find network connection values or if you want to set connection manually, set it to Manual. Refer to following “How to set up manually”. ¦ ¦ Wired Network Setup (Manual) Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address. Getting the Network Connection Values To get the Network connection values on most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. 2. In the pop-up menu that appears, click Status. 3. On the dialogue that appears, click the Support tab. 4. On the Support Tab, click the Details button. The Network connection values are displayed. How to set up manually To set up your TV’s cable network connection manually, follow these steps: 1. Follow Steps 1 through 2 in the “How to set up automatically” procedure. 2. Select the IP Settings on network connection screen. 3. Set IP Mode to Manual. 4. Press the Ў button to go to the first entry field. IP Settings R Return OK IP Mode Manual IP Address 0 . 0 . 0 . 0 Subnet Mask 0 . 0 . 0 . 0 Gateway 0 . 0 . 0 . 0 DNS Mode Manual DNS Server 0 . 0 . 0 . 0 5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons to enter numbers and the arrow buttons to move from one entry field to another. 6. When done, select the OK. 7. The network connection screen appears, and network setting is done. The check list for wired network connection failure When wired network connection failed, try to apply the following information to each issue. Issues Solutions and Explanations No network cable found. • Check that your network cable is plugged in. • If it is connected, make sure that the router is turned on; if it is on, try turning it off and on again. IP auto setting failed. Try the following to set your IP address automatically or set your IP address manually by selecting IP Settings. • Ensure DHCP server is enabled on router and unplug and re-plug-in the router. • Contact your Internet Se...
Questo manuale è adatto anche per i modelli :TV - LA32E420E2W (2.08 mb)
TV - UA22ES5000W (2.08 mb)
TV - UA26EH4000W (2.08 mb)
TV - UA32EH4000W (2.08 mb)