valutazioni - 4, GPA: 4
(
)
)
|
Facilità d'uso
See the Owner’s Guides for those devices for instructions. IMPORTANT To connect a personal computer to the TV, see chapter 6, “Using the TV with a Personal Computer.” The HDMI input processes signals as standard motion video and is not designed to process computer resolutions. DVI Video Device (Cable Box, Satellite Receiver, DVD Player, or Other Device) Analog stereo audio cables and a DVI-to-HDMI cable or DVI/HDMI adapter and HDMI cable are required. These are not included with the TV. They may be available at your local electronics retailer. 1. Connect the DVI-to-HDMI cable (recommended) or HDMI cable with DVI/HDMI adapter from the DVI device’s back panel to the TV back panel. NOTE: If you are using a DVI/HDMI adapter, it is important to connect the adapter to the DVI device for best performance. Figure 12. Connecting a DVI device Chapter 2. TV Connections DVD Player with Component Video Component video cables and analog audio cables are required. These are not included with the TV. 1. Connect the component video cables from Y PB PR VIDEO OUT on the back of the DVD player to the COMPONENT jacks on the TV back panel, matching the red, green, and blue colored connections. 2. Connect left (white) and right (red) stereo audio Figure 13. Connecting a DVD player with component video receiver Owner’s Guides. A/V Receiver (Stereo System) Most setups require either a digital audio cable or analog stereo audio cables. The TV makes all audio available in digital and analog formats. Analog audio coming into the TV is available in digital format on the DIGITAL AUDIO OUT jack. Digital incoming audio is available in analog format on the Figure 14. Connecting audio from the TV to an A/V receiver Note: On rare occasions, an HDMI signal may be copy-restricted and cannot be output from the TV as a digital signal. To hear these copy-protected signals through the A/V receiver, use connections for analog A/V receivers. Check the A/V receiver’s Owner’s Guide for information concerning use of the digital input and switching between digital sound and analog stereo sound from the TV. 32 Chapter 2. TV Connections 2. Connect one coaxial cable from OUT on the RF split- ter to ANT 1/MAIN on the TV back panel. 3. Connect one coaxial cable from OUT on the RF split- ter to IN on the standard cable box. 4. Connect one coaxial cable from OUT on the cable box to ANT 2/AUX on the TV back panel. ............................................................................................................................................................................ ............................................................................ ............................................................................................................................ ...................... .................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... R ............................................................................................................................................................................ ............................................................................ ............................................................................................................................ ...................... ................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ ................................................................ .................................................................................................................................................................................................................................................. Figure 15. Connecting an older cable box 2. Connect left (white) and right (red) audio cables from AUDIO OUT on the camcorder to INPUT 3/ AUDIO L and AUDIO R on the TV. .................................................................................... Older Cable Box Required: 3 coaxial cables, one two-way RF splitter. These are not included with the TV. When this setup is complete, you can use the TV remote...
Questo manuale è adatto anche per i modelli :TV - WD-52631 (5.45 mb)
TV - WD-52631 (5.45 mb)