valutazioni - 2, GPA: 3.5
(
)
)
|
Facilità d'uso
2. If the User Page is not what you want to view, press the “PAGE ” button to select. 3. Press the “ AVG” button to view different Average Values. 5 different Average Values are available: SAFETY PRECAUTIONS Babies, young children, or individuals who cannot express their consent are not suitable for blood pressure measurement. Individuals with serious arteriosclerosis are not suitable for blood pressure measurement. Blood pressure readings may fluctuate during pregnancy. Pregnant women should consult their doctor before taking measurement. If there are unusual values, please consult your doctor before taking medical action. Handling batteries properly: - As soon as old batteries wear out, replace them with new batteries. - Do not use old and new batteries together. - Align the polarities of batteries correctly. - When the unit will not be used for more than 3 months, remove the batteries. Otherwise, batteries may leak and cause damage to the unit. QUICK-START GUIDE 1. Sit upright in a chair with your feet on the floor. 5. When the measurement is complete, the cuff will automatically deflate and your systolic and diastolic pressure values and pulse rate will display. 4. Press the “ ” button. The cuff will automatically inflate and the measurement will start. 3. Pull on the end of the cuff until it wraps securely around your wrist. Place your arm on a table so that the cuff will be at the same level as your heart. 2. Remove tight-fitting or thick clothing from the lower arm. Monitor Features OVERVIEW 2.1 Battery Installation Note:Replace batteries when the battery indicator “ ” shows low voltage. 3. Slide the battery cover back to close it. The cover will click into place when completely closed. PREPARATION 1. Remove the battery cover in the direction indicated on the cover. 2. Insert 2 AAA batteries with the polarities as indicated. 2.2 Setting the Date and Time Note: - Set the correct date and time before taking a measurement. - Reset the date and time after replacing the batteries. 1. Press and hold the “ AVG” button for a few seconds until the Year display flashes. 2. Press the“ MEMO” or “PAGE ” button to select the current year. 3. Press the“ AVG” button to confirm Year Setting. 4. Follow the same steps to set the Month, Date, Hour and Minute. Note: If you select Clock Function “ON”, you will continue at the Alarm Setting section. Otherwise, setting will end. 5. “ON” and “OFF” will then flash. This is to have the clock display when the unit is not in use; you can choose Clock Function “ON” or “OFF”. Press “ MEMO” or “PAGE ” button to select. Press the “ AVG” button to confirm. 2.3 Setting the Alarm Note: - You will not be able to set alarm clock if Clock Function is set to “OFF”. - You can set a maximum of 4 alarms. 9. When Minute digit flashes, press the“ MEMO” or “PAGE ” button to select Minute. Press the“ AVG” button to confirm. 10. Follow the same steps to set the 2nd, 3rd, and 4th Alarm. 6. To disable Alarm, Press the ” MEMO ” or “PAGE ” button to select “OFF” and press the ” AVG” button to confirm. 7. To set 1st Alarm, Press the” MEMO” or ” PAGE ” button to select “ON”. Press the ” AVG” button to confirm. 8. When Hour digit flashes, press the“ MEMO” or “PAGE ” button to select Hour. Press the“ AVG” button to confirm. Note: - Press the “ ” button anytime during clock setting/alarm setting to start over if an error occurs. - Each alarm lasts 45 seconds, or you can turn it off by pressing the “ ” button. TAKING A MEASUREMENT Note: - Avoid smoking, eating or exercising for 30 minutes before taking a measurement. - Do not move or talk during measurement. - Measurement can be taken on either arm; however, if possible, always take measurements on the left arm. Avoid smoking, eating or exercising for 30 minutes before taking a measurement. Do not move or talk during measurement. Measurement can be taken on either arm; however, if possible, always take measurements on the left arm. 3.1 Sitting Correctly 3. Remove thick or tight-fitting clothing from the lower arm. Do not roll up your sleeve if it is too tight. 4. Place your arm on a table so that the cuff wil be at the same level as your heart. 3.2 Applying the Wrist Cuff 1. Place your elbow on a table with the palm facing upward. Wrap the wrist cuff around the left wrist as shown below. 2. Pull on the end of the cuff until it wraps securely around your upper wrist. Do not over tighten the cuff. Allow 1-2 cm or . inch between the bottom of the cuff and your wrist joint. 1. Relax. 2. Sit upright in a chair with your feet on the floor. 3. Make sure the cuff is at the same level as your heart. 3.3 User Setting Press ”PAGE ” button to switch between User Page 1 ,2, 3 and 4. This unit allows a maximum of 4 users to store measurement records in different User Pages. 1. Press the “ ” button. The cuff will automatically inflate and the measurement will start. 2. When the measurement is complete, the cuff will automatically deflate and your systolic and diastolic pr...