... Main Features ... This printer can be used for high-speed high-quality printing thanks to its direct thermal method and thermal transfer method that use a line thermal printhead together with its 32 bit RISC CPU and its 'history control IC'. • It is easy to change the printer’s settings on the operation panel, thanks to its unique and simple VuePrint menu system. •Its high-lift printhead and mechanism means that media and ribbon can be loa

The actual output from the printer is "vertically reversed" due to the way the printer outputs the menu options. Please look at the example below to see how the output changes. Menu Setting Flow Chart (p.32) Menu Setting Flow Chart (p.32) Mode Settings Printer Operation Mode Settings Menu Setting Flow Chart (p.32) Printing of contents of settings Machine Information Model Number Boot Version ROM Ver

Thermal Transfer Barcode & Label Printer CL-S700 Series USER'S MANUAL CL-S700 CL-S703 CL-S700R CONTENTS Before Operation INTRODUCTION --------------------------------------------------------------------3 COMPLIANCE STATEMENT FOR EUROPEAN USERS -----------------------------4 FCC COMPLIANCE STATEMENT FOR AMERICAN USERS -----------------------4 EMI COMPLIANCE STATEMENT FOR CANADIAN USERS------------------------5 ETAT DE CONFORMITE EMI A L’USAGE DES UTILISATEURS CANADIENS -----5 IMPORTANT SAFETY INS

Set the media roll and media holder in to the printer as shown above. It is advisable to pull a length of media forwards and through the mechanism ready for later positioning. 5. Move the media roll so it is touching the left side of the housing. Then slide the black movable media guide so it is touching the media on the right side. Note: Do not try to hold the media too tightly with these guides as it will cause the printer to jam during printing. 6. Align the media with the left fixed media gu

Cut Counter – – Displays the cut count. Sensor Monitor – *.* V Displays the sensor level. Option Interface [Option I/F] – None LAN Displays the presence/absence of the optional interface. Test Mode Print Pattern Current Config Current Config Global Config Sample Executes the test pattern. Head Check No Yes Executes head check. No Factory Default No Yes No Initializes the set values of the configuration set to the state when the unit was shipped from the factory. Hex Dump No Yes No Sets the hex d