valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
permissions. See the following Microsoft articles for
Table 2 Validation tests (continued)
more information:
Successful?
•
How to Create a Cluster in a Restrictive Active
Test
Command(s) to execute
(Y/N)
Directory environment
pathping
Failover Cluster Step-by-Step Guide: Configuring
name> (Repeat for each DNS
server)
Accounts in Active Directory
Additionally, verify that the DNS information is valid
for the cluster and file server. HP recommends that you
Validate network information
also verify the iLO and Enclosure Manager IP
address/name resolution; however, this is not critical
Confirm that the IP address and names are not already
to support the cluster and file server.
in use.
Complete the tests in Table 2 (page 2) to verify
network connectivity. Consult with your network
administrator to confirm test results.
Installing an HP BladeSystem c-Class
enclosure
Table 2 Validation tests
Before performing any blade-specific procedures,
Successful?
install an HP BladeSystem c-Class enclosure.
Test
Command(s) to execute
(Y/N)
The most current documentation for blades and other
Ping the IP address ping
HP BladeSystem components is available on the
of the StoreEasy
documentation CD that ships with the enclosure and
system from
another system on
at the following HP website:
the same network.
http://www.hp.com/go/bladesystem/documentation
Ping the IP address ping
of some other
system on the
same network form
Installing blade options
the StoreEasy
system.
Before installing and initializing the blades, install any
blade options, such as an additional mezzanine card.
Ping the name of
ping
For blade options installation information, see the HP
the StoreEasy
ping
system from
ProLiant BL460c Gen8 Server Blade User Guide on
another system on
the documentation CD that ships with the enclosure
the same network.
and at the following HP website:
Ping the name of
ping
http://www.hp.com/go/bladesystem/documentation
some other system ping
on the same
network form the
StoreEasy system.
Installing interconnect modules
If you will be adding the StoreEasy system to an Active Directory
domain, some additional tests include:
For specific steps to install interconnect modules, see
the documentation that ships with the interconnect
Ping the domain
ping
controller from the address>
StoreEasy system.
To support network connections for specific signals,
ping
install an interconnect module in the bay corresponding
to the embedded NIC or mezzanine signals.
Verify the network pathping
controller and
pathping
controller name>
correct.
pathping
DNS server)
Page 2
...
dati dispositivi di elaborazione - HP StoreEasy 3830 Gateway Storage/S-Buy (396.48 kb)
dati dispositivi di elaborazione - HP StoreEasy 3840 Gateway Storage (396.48 kb)
dati dispositivi di elaborazione - HP StoreEasy 3840 Gateway Storage/S-Buy (396.48 kb)
dati dispositivi di elaborazione - HP X3400 G2 Network Storage Gateway (396.48 kb)