valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
HP StoreEasy 1000 Storage
are using static addressing or a DHCP server that does
not automatically update DNS, ensure that both forward
NOTE:
The keyboard, mouse, and monitor
Quick Start Guide
Supported storage systems
and reverse DNS information (A and PTR records) is
are not provided with the storage system.
These installation instructions apply to the following HP
pre-staged in the DNS server.
•
iLO—Access the storage system using the iLO
StoreEasy 1000 Storage models:
Use Table 1 (page 1) to document your network
remote management method:
information before proceeding with system setup.
IMPORTANT:
Read this document first.
1.
Connect a network cable to the iLO port
StoreEasy model
Platform
Table 1 Network information
located on the back of the storage system.
HP StoreEasy 1450 Storage
HP ProLiant DL160 Gen9 server
2.
Connect a power cable to the storage system.
Fully qualified DNS
HP StoreEasy 1650 Storage
HP ProLiant DL380 Gen9 server
Network device
name (FQDN)
IP address
3.
Locate the iLO Network Settings tag attached
to the storage system and record the default
HP StoreEasy 1850 Storage
HP ProLiant DL380 Gen9 server
System
user name, password, and DNS name.
iLO
4.
From a remote computer, open a standard
For details and specifications about each model, see
Web browser and enter the iLO management
the HP StoreEasy 1000 Storage QuickSpecs available
Restrictive Active Directory environments
hostname of the storage system.
at:
If the StoreEasy system is placed in a restrictive Active
http://www.hp.com/go/StoreEasy1000
NOTE:
By default, iLO obtains the
Directory environment, it might require pre-staging Active
management IP address and subnet
For general information about HP ProLiant Gen9 servers,
Directory objects or certain administrative permissions.
mask from your network’s DHCP server.
go to:
For more information, see the following Microsoft
The hostname found on the iLO tag is
http://www.hp.com/go/proliantgen9/docs
articles:
automatically registered with your
•
How to Create a Cluster in a Restrictive Active
network’s DNS server. If the DHCP
IMPORTANT:
Included with your storage system
Directory environment
configuration is not possible or the
is the HP Storage System Recovery DVD. This DVD
system is not found in DNS, use the
is used to restore the system to factory defaults.
•
Failover Cluster Step-by-Step Guide: Configuring
direct attach method to configure iLO
Keep this DVD in a safe place.
Accounts in Active Directory
with a static IP address.
The Microsoft Windows Storage Server 2012 R2
Standard Edition operating system is preinstalled and
5.
Using the default user information provided on
activated on all systems.
Access the storage system
the iLO Network Settings tag, log on to iLO
and launch a remote console to the storage
Use either the direct attach or iLO (HP Integrated
system.
Lights-Out) method to connect to the storage system.
For detailed instructions on these access methods, see
Install the storage system hardware
IMPORTANT:
Only the direct attach and iLO
the HP StoreEasy 1000 Storage Administrator Guide
1.
Install the rail kit by following the HP Rack Rail Kit
access methods can be used to install the storage
available at http://www.hp.com/support/
Installation Instructions, which is packaged with the
system. When the storage system installation
StoreEasy1000Manuals or the HP iLO 4 User Guide,
rail kit.
process completes and the server’s IP addresses
which you can search for (by product name) at http://
2.
Install the storage system into the rack.
have been assigned, you can use the remote
www.hp.com/support/manuals.
desktop method to access the storage system.
© Copyright 2015 Hewlett-Packard Development Company, L.P.
Microsoft® and Windows® are U.S. registered trademarks of Microsoft
Corporation.
NOTE:
When connecting to the storage system
Record network information
to complete the initial setup, ensure that no
Power on and complete the configuration
It is critical to have the correct networking information
external disk enclosures are connected to the
1.
Power on the system by pushing the power button
available before proceeding with the system installation
storage system. Otherwise, the OS drive could be
on the front panel. If using iLO, click Momentary
and configuration. It might be necessary to pre-stage
created on the disk enclosure if any drive on the
Press under the Power Switch menu of the remote
DNS information. Contact your system administrator to
disk enclosure is labeled “system” and would
console.
clarify network configuration requirements.
prevent storage provisioning from occurring.
HP Part Number: B7D88-96332
The storage system starts and displays the Setup
Published: March 2015
•
Windows wizard.
Direct attach—This access method is mandatory if
Edition: 1
*B7D88-96332*
IMPORTANT:
Before joining the StoreEasy
system nodes to the Active Directory domain,
your network does not have a DHCP (Dynamic Host
2.
Select the desired language, country or region,
ensure that there is a network connectivity between
Configuration Protocol) server. Connect the
language settings, keyboard layout, and click Next.
each node and domain controller.
following cables to the back panel of the storage
3.
Accept the license agreement and click I Accept.
system in this sequence: keyboard, mouse, network
4.
When prompted, enter a password of your choice
The HP StoreEasy 1000 Storage requires a minimum of
cables, monitor cable, and power cable.
and click Finish. The password that you enter must
2 IP addresses. These addresses can be statically
be the one you can remember.
assigned, assigned by a DHCP server, or both. If you
Page 1
... Questo manuale è adatto anche per i modelli :
dati dispositivi di elaborazione - HP StoreEasy 3830 Gateway Storage/S-Buy (124.49 kb)
dati dispositivi di elaborazione - HP StoreEasy 3840 Gateway Storage/S-Buy (124.49 kb)
dati dispositivi di elaborazione - HP X3400 G2 Network Storage Gateway (124.49 kb)
dati dispositivi di elaborazione - HP X3800 G2 Network Storage Gateway (124.49 kb)