valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
Keep the operating instructions in a safe place! General safety warnings Danger of electric shocks or fire! The appliance is to be connected and used in accordance with the information stated on its characteristics plate. Never plug the appliance into the mains supply if the cable or the appliance itself show visible signs of damage. In order to avoid that, under unfavourable mains conditions, phenomena like transient voltage drops or lighting fluctuations can happen, it is recommended that the iron is connected to a power supply system with a maximum impedance of 0.27 .. If necessary, the user can ask the public power supply company for the system impedance at the interface point. Keep the appliance out of children’s reach. The iron must be used and placed on a stable surface. When placed on its support, make sure that the surface on which the support stands is stable. Do not use the iron if it has been dropped, shows visible signs of damage or if it is leaking water. It will have to be checked by an Authorised Technical Service centre before it can be used again. Unplug the mains cable from the electrical socket before attempting to fill the tank with water. Unplug the appliance from the mains supply after each use or if a fault is suspected. With the aim of ensuring safety, any work or repairs that the appliance may need, e.g. replacing a faulty mains cable, must only be carried out by qualified personnel from an Authorised Technical Service Centre. Should you have to leave the area where you are ironing, unplug the iron from the mains socket. Before using your appliance for the first time Fill the tank of the iron with tap water and set the temperature control to “max.”. Plug in the appliance to the mains. When the steam iron has reached the desired temperature (pilot light goes out), let the water create steam by setting the steam control to “2” and by repeatedly pressing the button . When using the steam function for the first time, do not direct the steam towards the laundry, as there could still be contaminants in the steam dispenser. Using the appliance The pilot light illuminates while the iron is heating up. As soon as the selected temperature has been reached, the light goes out. lf the iron is already hot, you can continue ironing while the iron is heating up. Sort laundry according to the fabric care labels and start at the lowest temperature “•”. Filling the tank Fig. 1 Set steam control to “0” and remove the plug! Use only clean water from the tap without mixing anything with it. The addition of other liquids will damage the appliance. Mix tap water with distilled water according to the following table in order to prolong the optimum stream function. Water Ratio of distilled water hardness to tap water Very soft/soft 0 Medium 0 Hard approx.1 Very hard approx. 2 You can inquire about the water hardness with your local waterworks. Do not fill beyond the “max.” level mark! Ironing without steam Fig. 2 Set the steam controller to “0”. Rotate the temperature controller to the required position. If required, use spray. Ironing with steam Fig. 3 Set temperature control to and following the heating up, set the steam control to “1” or “2”. Set the temperature control to position “••”: steam control to “1”. Set the temperature control to position “•••” or “max.”: steam control to “2”. Spray Fig. 4 Vertical steam feature Fi...
Questo manuale è adatto anche per i modelli :Ferri - PV1510/02 (2.11 mb)
Ferri - PV1520/01 (2.11 mb)