Log:
Scaricare : 2   File Size : 3 mb   Produttore : Air King  
Categoria : Fans

Scaricare : 4   File Size : 3 mb   Produttore : Air King  
Categoria : Fans

Scaricare : 2   File Size : 3 mb   Produttore : Air King  
Categoria : Fans
@name@name@name@name

• Clean the inner housing using a hand hot solution only(never use caustic detergents, abrasive powders or brushes). Fig. 3 Charcoal filter • The charcoal filter should only be used if you want to use the hood in recirculation mode. • Cleaning/replacing the carbon filter Unlike other carbon filters, the LONGLIFE carbon filter can be cleaned and reactivated. At normal use the filter should be cleaned every second month (when using the hood 2,5 hours per day, in avarage). The best way to clean the

Scaricare : 10   File Size : 3 mb   Produttore : Air King  
Categoria : Fans

• Failure to follow the instructions as concerns hood and filter cleaning will lead to the risk of fires. • Do not use or leave the hood without the lamp correctly mounted because of the possible risk of electric shocks. • We decline any responsibility for any problems, damage or fires caused to the appliance as the result of the non-observance of the instructions included in this manual. This appliance is marked according to the European directive 2002/96/ EC on Waste Electrical and Electronic

Scaricare : 0   File Size : 3 mb   Produttore : Air King  
Categoria : Fans
@name

We are sure you will find your new rangehood a pleasure to use. Before you use your rangehood, we recommend that you read through the whole user manual, which provides the description of the rangehood and its function. To avoid the risks that are always present when you use an electrical appliance it is important that the canopy rangehood is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. We recommend that you keep this instruction booklet for

Scaricare : 1   File Size : 3 mb   Produttore : Air King  
Categoria : Fans
@name

We do not recommend venting into ceiling cavity. NOTE: Installation must be in accordence with local building regulations. NOTE: To ensure optimum performance of the rangehood, the use of rigid ducting is recommended. The use of bends should be avoided. Rigid flexible ducting is suitable, although loose flexible ducting is unacceptable. All ducting must be fire retardant. Installation of telescopic exhaust covers Separate the inner and outer exhaust covers, and carefully remove the protective co

Scaricare : 0   File Size : 3 mb   Produttore : Air King  
Categoria : Fans
@name

4. Remove the protective plastic film from the hood body and hang hood on the mounting brackets then secure at the anti-tilt locations as indicated in diagram left. Depending on the preferred installation/ducting mode, follow step 5a or 5b below. 5a. Recirculating mode (Fig. a). Using the centre line, secure the ceiling mount bracket to the wall using suitable screws. Attach the recirculating T-piece (optional kit AR600RK for models ERCM9010 and ERCE9020, or AR600RKG for model ERCG9030) to the c

Scaricare : 1   File Size : 2 mb   Produttore : Air King  
Categoria : Fans
@name

This operation is necessary after approximately 160 working hours. (Please see page 13 for instructions on Cleaning/replacing). Resetting the saturation indicator After cleaning the filters, press button A for 3 seconds until the grease filter LED D or the activated charcoal filter LED E stops flashing. Maintenance and care • The hood must always be disconnected from the mains power supply before beginning any maintenance work. Metal grease filter • The purpose of the grease filters is to aspira

Scaricare : 0   File Size : 2 mb   Produttore : Air King  
Categoria : Fans
@name

Use the wire connecting nuts supplied with your fan. Secure the connectors with electrical tape. Make sure there are no loose strands or connections. 1. Connect the ground conductor of the 120v supply (this may be a bare wire or a wire with green colored insulation) to the green ground lcad(s) of the fan (Fig. 9). There are 3 green grounding leads; one from the ceiling mounting bracket and one from the ball/downrod assembly and one from motor assembly. 2. Conncct the fan motor white wire to th

Scaricare : 1   File Size : 2 mb   Produttore : Air King  
Categoria : Fans
@name

House wiring locationHouse wiring locationHouse wiring locationHouse wiring locationHouse wiring location • The junction box is located on the top left side of the hood. • Wiring should enter the back wall at least 20" above the bottom of the installation height, and within 5-7/8" and 4-7/8"of the left side of the centerline. !"!#$ % #& '(&!#$)*""% #&'(& +, -. +- Installing the hood Install framing for hood support Install framing for hood supportInstall framing for hood sup





categorie