valutazioni - 4, GPA: 4.5
(
)
)
|
Facilità d'uso
Analog : The inputs are fixed at the analog 2-channel inputs. 6ch Input : The inputs are fixed at the analog 6-channel inputs. This mode can be selected only when the DVD input is selected with the input selector. • You cannot select the Input Analog mode if you are playing DTS-encoded media. • When you use Full Auto mode with certain DVD and LD players, performing operations such as “Skip” or “Stop” may momentarily interrupt the output. This could switch the “Listen Mode” automatically to the surround mode intended for the input signal if you have manually selected a different listen mode. • Different input modes can be selected for the different input devices. The selected input modes for the separate input devices are stored in the memory. • When playing a DVD Audio disc with a DVD Audio-compatible DVD player: 1. to reproduce stereo audio, set the input mode of the receiver to 6ch Input. 2. to reproduce multi-channel audio, set the input mode of the receiver to 6ch Input. 22 How Do I Adjust the Surround Modes? Switching Input Modes To fully enjoy the sonic benefits of specially-encoded DVD AUDIO discs played on a compatible DVD player, you must set the receiver’s input to 6Ch Input. When you are finished listening to analog media, set the receiver’s input back to Full Auto. 1. Press the F.SHIFT = LISTEN M. (INPUT MODE)* button on Remote Control unit. 1 2 3 4 5 6 7 8 9 10 11 12 +10 0 +100 /8 /7 1 1 Input Status Dolby Digital F.Auto 2. Repeat step 1 until the desired input mode is displayed. Operation on the receiver: 1. Press the INPUT MODE button inside the door repeatedly until FULL AUTO, DIGITAL MANUAL, ANALOG or 6CH INPUT is displayed. • If you turn off the receiver, select a different source device, the “Digital manual” is reset to “Full Auto”. • When you use “Full Auto” mode with certain DVD and LD players, performing operations such as “Skip” or “Stop” may momentarily interrupt the output. * When an operation is described as [F.SHIFT = LISTEN M. (INPUT MODE) button], for example, press the F.SHIFT button and press the next button (the LISTEN M. (INPUT MODE) button in this case) within 8 seconds. Using Receiver 23 Using Receiver Using Receiver How Do I Adjust the Surround Modes? To set the THX Mode Press the THX button on Remote Control unit. 1 2 3 4 5 6 7 8 9 10 11 12 +10 0 +100 /8 /7 1 1 THXCinemamodeTHXSurEXOn Each press switches the modes as follows. When the surround back speakers When the surround back speakers are set to Lrg or Nml/THX: are set to Off: 1 THX On 2 THX Sur EX Auto 1 THX Sur EX On 2 THX Off 3 THX On 4 THX Off Operation on the receiver: Press the THX button inside the door repeatedly until the desired THX mode is displayed. Each press switches the modes as follows. When the surround back speakers When the surround back speakers are set to Lrg or Nml/THX: are set to Off: 1 THX ON 2 THX Sur EX AUTO 1 THX Sur EX ON 2 THX OFF 3 THX ON 4 THX OFF After 3 seconds, the display of the set THX mode returns to the previous display. 24 How Do I Adjust the Surround Modes? . THX Sur EX On The input signal is decoded automatically into 6.1-channel signals if the input signal is Dolby Digital or DTS and contains two channel surround signals. The THX operation is activated. . THX Sur EX Auto The input signal is decoded into 6.1-channel signals only when the input contains the Dolby Digital Surround EX encoded identification signal. The THX operation is activated . THX On The THX operation is activated. (6.1channel decoding will not be applied.) . THX Off The THX Surround EX and THX operations are deactivated. • To play Dolby Digital Surround EX-encoded software in 6.1 channels, it is required to set the THX Surround EX mode to On or Auto. Note that some of Dolby Digital Surround EX-encoded software does not contain the identification signal. In this case, set the THX Surround EX mode to On. • Set the THX mode to Off when DTS-ES decoding is required. • The THX operation is not activated with the 96k fs PCM signal. • When Dolby Pro Logic II: Music is selected while THX Sur EX On, THX Sur EX Auto or THX On is selected, the THX mode will be switched Off. • As long as Dolby Pro Logic II: Music is selected, switching the THX mode does not produce any effect. • Different THX modes can be selected for the different input devices. The selected THX modes for the separate input devices are stored in the memory. Using Receiver 25 Using Receiver Using Receiver How Do I Adjust the Surround Modes? To set the Listen Mode manually The listen mode can be set manually except with certain input signals. 1. Press Remote Control unit’s LISTEN M. button repeatedly until the desired listen mode is displayed. ListenModeDolbyDigitalProLogicF.Auto1 2 3 4 5 6 7 8 9 10 11 12 +10 0 +100 / /7 1 1 Operation on the receiver: Press the LISTEN MODE button inside the door repeatedly until the desired listen mode is displayed. After 5 seconds, the display of the set listen mode returns to the previous display. • The available listen...
Questo manuale è adatto anche per i modelli :Video - VR-5090 (918.25 kb)
Video - VR-5700 (918.25 kb)