valutazioni - 5, GPA: 4.6
(
)
)
|
Facilità d'uso
Grasp the filter, and pull it forward, up, and out of the unit. Remove the plastic wrapping and replace the filter in the unit. The white HEPAtech™ filter material should be facing outward (towards you). 4. Before closing the front cover, check the placement of the foam pre-filter. It is installed under clips in the front cover. This pre-filter is washable and should be washed gently in cold, soapy water whenever you notice a build up of dust or lint. However, the prefilter should be completely dry before you reassemble it to the unit. The pre-filter extends the life of the HEPAtech™ system filter. 5. Close the front cover by once again pressing the buttons and allowing the front cover to slip into place over the buttons. The unit is now ready for normal operation. 6. Plug the unit into a 120V electrical outlet. 7. Select a speed by sliding the speed selector to the appropriate location. The red power light will be illuminated when you have selected a speed. Models 30025, 30040 and 37025 Only: 8. Turn the ionizer ‘on’, by sliding the ionizer switch to the ‘on’ position. The green light will be illuminated when the ionizer is ‘on’. NOTE: The ionizer can release negative ions when the fan is not blowing. If it is used consistenly without the fan, the dust particles that are attracted to the negative ions may deposit on your walls and floors. To minimize these deposits, we recommend that you use the ionizer only when the fan is blowing (when the unit is on LO, MED, or HI speed). Cleaning And Filter Replacement 1. Every few weeks, you should open the front grill and view the condition of the HEPAtech™ System Filter. Compare the filter to the color coded chart that is on the inside of the housing. If the filter matches the dark color on the chart, you should remove the filter and replace it with a new filter. BE SURE TO REMOVE THE PLASTIC WRAPPING BEFORE PLACING THE NEW FILTER INTO THE AIR PURIFIER. 2. Clean the outside of the unit with a soft, damp cloth. The front grill can be removed and cleaned in soapy water. 3. When you remove the front grill to clean it, you should also remove the pre-filter from the front grill and gently wash it in soapy water. Washing the pre-filter can help extend the life of your HEPAtech™ Filter. 4. Be sure the front grill and pre-filter are completely dry before you reassemble them with the unit. 5. Models 30010, 30025, 37025 and 30040 use Filter #30915. No other filter or material should be used unless approved by Hunter Fan Company. 41282-01 9-1-2001 4 ©2001 Hunter Fan Company 41282-01 9-1-2001 5 ©2001 Hunter Fan Company Ionizer (Selected models only) Clean/Purified Air Leaving Filter Pre-Filtering Sub-Micron Filter Odor Filter How The HEPAtech™ System Works Dust & Irritants Pollen & Allergens Odors Bacteria & Microorganisms Animal Hair & Dander The above is an illustration of how the HEPAtech™ air purification systems work. Dust and other irritants are pulled into the air purification system and cleaned through the HEPAtech™ Filter. Clean, purified air is released into the room. Other Home Comfort Products from Hunter Old Time Ceiling Fan The Care-Free Humidifier™ Programmable Thermostat To learn more about Hunter Fan Company products, please see our web page at: WWW. HUNTERFAN.COM Replacement Parts To obtain a replacement part for your air purifier, contact customer service at (US) 1-888- 830-1326, (Canada) 1-888-855-8300, or e-mail us at TechSupport@hunterfanhq.com. Please be prepared to tell the operator the model number of your air purifier and the name of the part you need to replace. Refer to figure 1 for part names. Models 30010, 30025, 37025 and 30040 use Model 30915 replacement filters. Hunter Fan Company HEPAtech™ Air Purification System 5 YEAR LIMITED WARRANTY The Hunter...
Questo manuale è adatto anche per i modelli :Aria - 30010 (344.32 kb)
Aria - 30025 (344.32 kb)