It is necessary to refer the manual. Do not install the tweeter where it may be subjected to excessive heat moisture, dust or where they it be kicked repeatedly, brushed or bumped. Before mounting and connecting the wires be sure that wire of the negative pole terminal is disconnected from accumulator. Nonobservance of this demand may cause the short circuit or fire. . To prevent short circuit never put or leave any metal objects (e.g. coins or metal tools) inside the tweeter. . Make absolut

The owner’s manual contains important operating and maintenance instructions for your safety. It is necessary to refer the manual. Do not install the tweeter where it may be subjected to excessive heat moisture, dust or where they it be kicked repeatedly, brushed or bumped. Before mounting and connecting the wires be sure that wire of the negative pole terminal is disconnected from accumulator. Nonobservance of this demand may cause the short circuit or fire. . To prevent short circuit never

The owner’s manual contains important operating and maintenance instructions for your safety. It is necessary to refer the manual. Do not install the tweeter where it may be subjected to excessive heat moisture, dust or where they it be kicked repeatedly, brushed or bumped. Before mounting and connecting the wires be sure that wire of the negative pole terminal is disconnected from accumulator. Nonobservance of this demand may cause the short circuit or fire. . To prevent short circuit never

For example you can use magic tape (supplied accessory) fix under seat (pic. 1). Remote control mounting: Select a mounting location that allows easy access to the control while driving. Using the subwoofer level remote control as a template, mark and drill holes in the mounting surface (pic. 2). Pic.1 Pic.2 2 Notes: . Verify that mounting location is safe for drilling and wiring, and it will not interfere with the mechanical and electrical components of the vehicle. Mount the unit using

Since the subwoofer is a large, heavy enclosure, it is highly recommended that you mount it in the trunk compartment of your vehicle. Mark the location for the mounting hole screws by positioning the cabinet where you wish to install it. Use heavy duty bolts to secure it. After you tightened it down, try to shake it or move it. Then tighten the screws again. Remote control mounting: Select a mounting location that allows easy access to the control while driving. Using the subwoofer level remo

HYUNDAI H-CST8A 8” AMPLIFIER BASS TUBE Instruction manual 8” (20 CM) АКТИВНЫЙ САБВУФЕР Руководство по эксплуатации MODEL:H-CST8A 8” AMPLIFIER BASS TUBE Output power: 320 W (Peak) 80 W 10%THD (Nominal) S/N ratio: 89 dB Input level: 160 mV (RCA-Line-In) 40 W + 40 W max gain; 5.5 V (Speaker input) 40 W + 40 W max gain. Power source: DC 12 V - 14,4 V Negative ground Frequency: Phase: Input 20 - 20000 Hz Output 80 - 120 Hz (Adjustable) 0 ° ,180 ° (1) Red: «+» Battery 12 V DC (2)

HYUNDAI H-CST12A 12” AMPLIFIER BASS TUBE Instruction manual 12” (30 CM) АКТИВНЫЙ САБВУФЕР Руководство по эксплуатации MODEL:H-CST12A 12” AMPLIFIER BASS TUBE Output power: 480 W (Peak) 120 W 10%THD (Nominal) S/N ratio: 90 dB Input level: 160 mV (RCA-Line-In) 120 W max gain; 10 V (Speaker input) 120 W max gain. Power source: DC 12 V - 14,4 V Negative ground Frequency: Phase: Input 20 - 20000 Hz Output 80 - 120 Hz (Adjustable) 0 ° ,180 ° (1) Red: «+» Battery 12 V DC (2) Black:

HYUNDAI H-CSRSA 8” AMPLIFIER BASS TUBE Instruction manual 8” (20 CM) АКТИВНЫЙ САБВУФЕР Руководство по эксплуатации ■ COMPONENT PART RADIATOR SPEAKER TERMINAL CONTROL UNIT • CONTROL UNIT POWER SUPPLY INDICATIVE LIGHT # TERMINAL BASS BOOST LOW PASS FREQUENCY 50Hz~80Hz~120Hz LEVEL CONTROL POWER/SPEAKER INPUT REMOTE INPUT • POWER SUPPLY INDICATIVE LIGHT [POWER ON] RED LED ON [POWER OFF] RED LED OFF ■ HOOKUP ( HIGH INPUT) SPEAKER SPEAKER OUTPUT «тая ■íS§Q ЕВД* es®-/®а G*e»i I

It is necessary to refer the manual. • Do not install the subwoofer where it may be subjected to excessive heat moisture, dust or where it will be kicked repeatedly, brushed or bumped. • Make absolutely sure that the terminals for the subwoofer are connected to the proper outputs from the music source. • Never run the wiring on the outside of the vehicle or under it where it can be damaged by road hazards or the moving parts of the vehicle. Use existing wire channels, sills, panels and moldin