patent no. 5,772,957) at room temperature, 125% tougher at minus 20° F. Because every cut counts 59L F&B A107035 AB 0301 CHAIN PART CUTTER CUTTER KICKBACK-REDUCING NUMBER PITCH GAUGE SEQUENCE TYPE FEATURES 58J .404” .058” Skip Chisel Ramp-shaped 58L .058” Standard Depth Gauges 59J .063” Skip 59L .063” Standard FILING INSTRUCTIONS FOR 58J, 58L, 59J, AND 59L CHAINS FILE SIZE: Use a 7/32" round file and file guide. TOP-PLATE TOP-PLATE DEPTH-GAUGE SETTING: CUTTING ANGLE: SIDE-PLATE ANGLE: FILING ANG

TOP-PLATE TOP-PLATE DEPTH-GAUGE SETTING: CUTTING ANGLE: SIDE-PLATE ANGLE: FILING ANGLE: FILE-GUIDE ANGLE: *See warning below .025" 60° 60° 25° 10° Oregon® .404”-pitch Super Guard® chains (58J, 58L, 59J, and 59L) may be capable of kickback that could result in serious injury to the saw operator or bystanders. Although these chains have features designed to reduce kickback energy, they are NOT low-kickback chains. Do not use Oregon® 58J, 58L, 59J, or 59L unless you have experience and specialized

WHICH CUTTER SEQUENCE IS BEST, STANDARD OR SKIP? WHICH TYPE OF CUTTING DO YOU DO? THE CUTTER SEQUENCE TO USE: I cut “non-fibrous” woods of average size, with guide bars up to approximately 28” Standard sequence (58L, 59L) I cut fibrous woods, such as cedar or hemlock Skip sequence (58J, 59J) I cut large wood, with long guide bars approximately 30” and longer Skip sequence (58J, 59J) For more information on these and other Oregon® products, contact your authorized Oregon® distributor, or: OREGON

• Square-ground chisel cutters, factory • Superior cutting speed and the ultimate in overall ground with optimum angles peformance (nose-clear, nose-buried, and boring) • Smooth, easy cutting, minimal feed force required, minimizes operator fatigue • Depth gauge is ramp-shaped, • Reduces roughness and kickback energies and offset without affecting performance • Clean-ground gullet • Maximum chip flow, helps prevent clogs from debris • No out-of-the-box filing is needed • Lubrilink™ tie straps •

RECOMMENDED TYPES OF USE Occasional Users Homeowners, campers and hunters Commercial Users Arborists, orchardists, farmers, landscapers, and utility workers RECOMMENDED SAW SIZES 91P is intended for use with electric saws and smaller gasoline-powered saws up to 2.5 cu. in. (41cc) RECOMMENDED BAR LENGTHS Use 91P with bars up to 18” (46cm) KICKBACK-REDUCING FEATURES • Ramp-shaped Bumper Depth Gauges • Notched Bumper Drive Links CUTTER SEQUENCE 91P is a standard-sequence chain. 91P F&B A107038 AA 0

It met the kickback performance requirements of ANSI B175.1 (USA), and CSA Z62.3 (Canada) when tested on a representative sample of chain-saws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance. ALL CUTTING SAW CHAINS CAN KICKBACK, which may result in severe personal injury to the saw operator or bystanders. Operate your saw safely. Read all warnings in your chainsaw operator’s manual. RECOMMENDED TYPES OF USE ft» Occasional Commercial

Users of our previous 52-series chains will find it easy to make the switch. 58CJ/CL, and 59CJ/CK/CL all feature a fast-working new chisel cutter that delivers performance superior to its predecessors in all cutting modes. The new cutter is mounted on our proven unequal-pitch 59 chassis for superior performance and durability. These chains give professional timber cutters who use square-ground .404”-pitch chains what they want: out-of-box sharpness, the ultimate in performance, resistance to str

10. .025" (.6 mm) .025" (.6 mm) 10. .025" (.6 mm) 55. 25. When using an OREGON® file guide, ALWAYS hold it level, 0°, flat on the Top Plate. * Failure to follow filing instructions can increase the level of kickback which can result in severe injury to the saw operator or bystanders. * Do not exceed the depth-gauge setting shown above * Always file depth gauges back to their original rounded or ramped shape after lowering OREGON® 72LGX/JGX, 73LGX/JGX, and 75LGX/JGX Super Guard® chains may be cap

Users of our previous 59LG-series and 52-series chains will find it easy to make the switch. 58J, 58L, 59J, and 59L all feature a fast-working new chisel cutter that delivers performance superior to its predecessors in all cutting modes. The new cutter is mounted on our proven unequal-pitch 59 chassis for an unmatched combination of performance and durability. Oregon® 58/59 Super Guard® gives professional timber cutters who use .404”-pitch chains what they want: out- of-the-box sharpness, high p

This series saw chain is only for professionals who demand saw chain that delivers high performance, resists stretch, simple to maintain, provides long life, and is consistent from loop to loop. CHAIN PITCH AND GAUGE 3/8" PITCH 72LGX .050" 73LGX .058" 75LGX .063" GAUGE KICKBACK – ANSI CLASSIFICATION Benefits Features 72LGX, 73LGX, and 75LGX are yellow-label chains. Though these chains have ramped depth gauges which reduce kickback energies, these are NOT low-kickback chains. These chains should