valutazioni - 1, GPA: 5
(
)
)
|
Facilità d'uso
DS Series IMPORTANT INFORMATION Fill out the enclosed warranty card and mail to the Perlick Corporation to register the warranty. If the card is not returned, the warranty period will begin from the date the equipment is shipped from the factory. This manual has been prepared to assist you in the installation of your Direct Draw Dispenser and to acquaint you with its operation and maintenance. We dedicate considerable time to ensure that our products provide the highest level of customer satisfaction. If service is required, your dealer can provide you with a list of qualified service agents. For your own protection, never return merchandise for credit without our approval. We thank you for selecting a Perlick product and assure you of our continuing interest in your satisfaction. WARNING: When lifting, the full weight of the cabinet must be supported. Lift from the cabinet base and not from the top. Improper lifting can result in severe damage to the cabinet. Form No. Z2280 2 Installation and Operating Instructions Sizes and Specifications, Direct Draw Dispensers - Self-Contained Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. 84” [2134] 4 KEG 72” [1829] 3 KEG 60” [1219] 2 KEG 6 5/16” [161] 24 3/4” [629] 12 11/16” [322] 10 9/16” [268] 1 1/8” [29] 3 11/16” [94] NOTE “A” 3 1/8” [79] 31 1/4” [794] DOOR HEIGHT 27 7/16” [697] DOOR OPENING 34 1/2” [876] 4 1/4” [107] R23 1/2” NOTE “B” NOTE “A”: 3/4” NPT DRAIN EXIT NOTE “B”: 1” NPS DRAIN ACCESS 23 1/2” [597] 19 7/8” [505] DOOR OPENING 18 3/4” [476] BACK LINER TO INSIDE OF DOOR SILL 68” [1726] 4 KEG 56” [1492] 3 KEG 44” [1118] 2 KEG KEG KEG KEG KEG CAPACITY 2 Keg 3 Keg 4 Keg NUMBER OF DOORS 2 2 3 CABINET Length Ins. (mm) 60” (1524) 72” (1829) 84” (2134) DIMENSIONS Depth Ins. (mm) 243/4” (629) 243/4” (629) 243/4” (629) Height Ins. (mm) 341/2” (876) 341/2” (876) 341/2” (876) NO. OF DISPENSING HEADS 1 1 2 NO. FAUCETS 2 2 2 CONDENSER UNIT H.P. 1/4 1/3 1/3 RUNNING LOAD - AMPS 5.9 7.5 7.5 SHIP WT lbs. (kg) 385 [175] 425 [193] 500 [227] INTERIOR Door sill: High strength polyethylene. Door pan and ceiling: High strength polystyrene. Floor pan: Satinless steel. Walls: Galvanized steel. EXTERIOR All Models: The top is 20 gauge stainless steel. The back, front and sides are stainless steel. Bottom is 18 gauge galvanized steel. Black Models: Doors and grilles are black vinyl coated steel. Stainless Models: Doors and grilles are stainless steel. REFRIGERATION R-134a capillary tube-type. Aluminum fin and copper tube evaporator, epoxy coated coil. Forced air into dispensing head. Adjustable temperature control. Self-defrosting. Pull-out condensing unit for service and cleaning. VENTILATION Front ventilated. ELECTRICAL 115 Volt, 60 Hz., 1 Phase AC. Furnished with three prong, six foot NEMA5-15P cord. Contact Perlick for other voltage/frequency requirements. PLUMBING 3/4” NPT drain exits out right end or 1” NPS out bottom. Evaporator condensate has been plumbed to a condensate pan located in the compressor housing. INSULATION Foamed-in-place polyurethane; 2” walls, 11/2” top and floor. OPTIONAL ACCESSORIES • Optional Dispensing Heads • Leg Set • Keg Couplers • Caster Sets • Shelf Kit • Faucet Locks DOOR FINISH MODEL NUMBERS SPECIFICATIONS BLACK DS60B DS72B DS84B STAINLESS STEEL DS60S DS72S DS84S Preparing the Cabinet for Use – Direct Draw Dispensers Self-Contained Parts List ¦ Faucet Standard. ¦ Faucet Head Assembly. ¦ Black Connector Hose 3.16” x 3’. ¦ 5.16” Air Hose. ¦ Spanner Wrench. ¦ Bag of Miscellaneous Parts. Suggested Tools Required ¦ #2 Phillips Screwdriver. ¦ Spanner Wrench (included). ¦ #10 Crescent Wrench. ¦ 9/16” Allen Wrench. ¦ 5/16” & 3/8” Nut driver. ¦ Power driver. Uncrating and Inspection Remove all crating material before operating. Carefully inspect cabinet for hidden damage. If damage is discovered, file your claim immediately with the transportation company. Perlick is not responsibl...
Questo manuale è adatto anche per i modelli :Dispenser - DS32 (495.13 kb)