Log:
Ordina : Nome ↑   Scaricare   Valutazione   Size ↑  
Scaricare : 2   File Size : 590 kb   Produttore : Desa Tech  
Categoria : Riscaldamento a gas
@name

Gas leak. See Warning statement at 1. Locate and correct all leaks (see Check- position top of page ing Gas Connections, page 12) 2. Control valve defective 2. Replace control valve Gas odor during combustion 1. Foreign matter between control valve 1. Take apart gas tubing and remove for- and burner eign matter 2. Gas leak. See Warning statement at 2. Locate and correct all leaks (see Check- top of page ing Gas Connections, page 12) 18 OWNER’S MANUAL These Parts Centrals are privately owned busi

Scaricare : 0   File Size : 574 kb   Produttore : Desa Tech  
Categoria : Riscaldamento a gas
@name

Exhaust fans, fireplaces, clothes dryers, and fuel-burning appliances draw air from the house to operate. This heater is a fuel-burning appliance. It uses air from inside the house for combustion. It also uses this air as a draft for venting. This draft air helps move combustion gases through the vent pipe to the outdoors. If your house is too airtight, there is not enough fresh air for these items to use. Fresh air may draw back into the house through venting flues and chimneys. This will keep

Scaricare : 0   File Size : 5 mb   Produttore : Desa Tech  
Categoria : Riscaldamento a gas
@name@name@name

3 -4 specifications .............................................................................................................. 5 product features ..................................................................................................... 5 unpacking and assembly ............................................................................................ 6 propane supply ........................................................................................................... 7 con

Scaricare : 2   File Size : 2 mb   Produttore : Desa Tech  
Categoria : Riscaldamento a gas
@name

These two holes are 14 inches apart from their centers. Attach mounting bracket to wall in one of two ways: 1. Attaching to wall stud 2. Attaching to wall anchor Attaching to Wall Stud: This method provides the strongest hold. Insert mounting screws through mounting bracket and into wall studs. Attaching to Wall Anchor: This method allows you to attach mounting bracket to hollow walls (wall areas between studs) or to solid walls (concrete or masonry). Decide which method better suits your needs.

Scaricare : 1   File Size : 247 kb   Produttore : Desa Tech  
Categoria : Riscaldamento a gas
@name

If installing bottom mounting screw into wall stud, drill hole at marked location using 9/64" drill bit. 5. Replace heater on wall. 6. Insert bottom anchor screw through back panel into bottom anchor or drilled hole (see Figure 11). 7. Tighten screw until heater is firmly secured to wall. Do not over tighten. Note:Do not replace front panel at this time. Replace front panel after making gas connections and checking for leaks (see pages 13-15). Figure 11 - Installing Bottom Mounting Screw CONNECT

Scaricare : 0   File Size : 3 mb   Produttore : Desa Tech  
Categoria : Riscaldamento a gas
@name

Consideration also must be given to service accessibility. The heater, when installed in aircraft hangars and public garages, must be installed in accordance with ANSI/NFPA 409-latest edition (Standard for Aircraft Hangars), ANSI/NFPA 88a-latest edition (Standard for Parking Structures), and ANSI/NFPA 88b-latest edition (Standard for Repair Garages) with the following clearances: a. At least 10 feet above the upper surfaces of wings or engine enclosures of the highest aircraft that may be housed

Scaricare : 0   File Size : 589 kb   Produttore : Desa Tech  
Categoria : Riscaldamento a gas
@name

— Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. — WHAT TO DO IF YOU SMELL GAS • Do not try to light any appliance. • Do not touch any electrical switch; do not use any phone in your build- ing. • Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions. • If you cannot reach your gas sup- plier, call the fire department. — Installation and service must be per- formed by a qualified inst

Scaricare : 4   File Size : 752 kb   Produttore : Desa Tech  
Categoria : Riscaldamento a gas
@name

18" Model: Noncombustible material OK. No hood accessory needed. Less than 8" Noncombustible material must be extended to at least 8". See Between 8" and 12",above. If you cannot extend material, you must operate heater with flue damper open. Heat Resistant Material (A) Figure 5 - Heat Resistant Material (Slate, Marble, Tile, etc.) Above Fireplace 8 103425 OWNER’S MANUAL INSTALLATION Continued MANTEL CLEARANCES In addition to meeting noncombustible material clearances, you must also meet require

Scaricare : 2   File Size : 752 kb   Produttore : Desa Tech  
Categoria : Riscaldamento a gas
@name

Even the lowest setting provides realistic flames and glowing embers from two burners. Selecting higher settings produces greater heat output. This results in increased heating comfort. WARNING: Do not operate heater between pilot and high. CAUTION: Do not try to adjust heating levels by using the manual shutoff valve. TO TURN OFF GAS TO APPLIANCE Shutting Off Heater 1. Press in and turn control knob clockwise to the HIGH position. 2. Turn the control knob clockwise to the PILOT position. 3. Pre

Scaricare : 7   File Size : 202 kb   Produttore : Desa Tech  
Categoria : Riscaldamento a gas
@name

Depleted gas supply 5. ODS/pilot is clogged 6. Gas regulator setting is not correct 1. Turn on gas supply or open manual shutoff valve 2. Press in control knob while turning to PILOT/ IGN position 3. Continue holding down control knob. Repeat igniting operation until air is removed 4. Contact local propane gas company 5. Clean ODS/pilot (see CLEANING AND MAINTENANCE, page 17) or replace ODS/pilot assembly 6. Replace gas regulator ODS/pilot lights but flame goes out when control knob is released





categorie