JB 55 is also easy to manoeuvre forwards/backwards and has a large, adjustable working width and lateral support as standard. JB 55 is very flexible and can cope with different duties. Iron wheels and plough are available as accessories. Equipped with 6 rotors cultivator as standard. KULTIVATORI ✓TIG* 14-2255-12 August 22, 2006 JB 55 (14-2255-12) DZINEJS Zimols Jauda Cilindri DEGVIELA Briggs & Stratton OHV Intek 5,5 hp/4,1 kW 1 Degvielas veids Unleaded Tvertnes tilpums 0,9 l ATRUMA K

No. 209 Mfr's. No.209 Mfr's. No. 203 PACKING The cultivator is packed in one carton disassembled for ease of shipment. ASSEMBLY 1. Attach parallel bars to dravr bar assembly as shown at (1). Lock with Jam nuts so bars are free to swing. 2. Attach depth crank (2) as illusiratod. Adjusting nuts (3) should be equally spaced on threads, 3. Clamp wheel standards to draw bar assembly as shown at (4). 4. Clamp lool holders to tool bar as shown at (5). 5. Attach the lool standards lo the tool

WARNING: The gearbox gets very hot after extended periods of use. To avoid burns, do not touch the gearbox until it has been allowed to cool. CULTIVATING 1. Move the cultivator to the work area prior to starting the engine/motor. 2. With the engine/motor running and the tines off the ground, press the throttle trigger to increase the engine speed. 3. Hold trigger handle and assist handle firmly. Slowly lower the cultivator until the tines make contact with the ground. 4. As unit begins cultivati

S Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit or outlet to be used for the powerhead. Receptacles are available having built-in GFCI protection and may be used for this measure of safety. 3 UNIT/MAINTENANCE SAFETY WARNING: Disconnect powerhead spark plug (or disconnect powerhead from power source) before performing maintenance. S Inspect entire unit before each use. Replace damaged parts. Check for fuel leaks. Make sure all fasteners are in place and secu

Porfavor,nodevuelvaelproductoallugardecompra. Veuilleznepasretournerleproduitaudetaillant. 1--800--554--6723Pleasedonotreturnproducttoretailer. Porfavor,nodevuelvaelproductoallugardecompra. Veuilleznepasretournerleproduitaudetaillant. 1--800--554--6723 Register your product online at: Registre su producto en linea en: Enregistrez votre produit en ligne a l’adresse : Instruction Manual Manual de Instrucciones Manuel d’Instructions PP2000T WARNING: Read and follow all Safety Rules and Operating In

S Tine Guard - --Discontinue use of cultivator if tine guard is damaged. CHECK FOR LOOSE FASTENERS AND PARTS S Clevis pins S Hitch pin clips INSPECT AND CLEAN UNIT AND DECALS S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild detergent. S Wipe off unit with a clean dry cloth. TINE MAINTENANCE WARNING: The tines will continue to spin after the engine stops or after the throttle trigger has been released. To avoid serious in

Make sure all fasteners are in place and securely fastened. S Maintain unit according to recommended procedures. S Have all maintenance and service not explained in this manual performed by an authorized service center. S Throw away tines that are bent, warped, cracked, broken, or damaged in any other way. Replace parts that are cracked, chipped, or damaged before using the unit. S Use only recommended Poulan PRO! parts and accessories. Never use wire, wire rope, string, flailing devices, etc. S