(254 mm) COMPOUND MITER SAW Item No. _924310 _924350 Save this manual for future reference. • SAFETY _, CAUTION: Read and follow • LOOSE PARTS all Safety Rules and Operating Instructions before first use of • INSTALLATION this product. • SERVICES Customer Help Line: t-800-932-3188 Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: 972000-603 2-00 READ ALL INSTRUCTIONS • READ THESE INSTRUCTIONS AND THE INSTRUCTIONS FOR THE 315.212100 COMPOUND MITER SAW THOROUGHLY

315.115160 WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: 983000-522 6-04 Save this manual for future reference US WARRANTY ONE YEAR FULL WARRANTY ON CRAFTSMAN TOOL If this Craftsman tool fails to give complete satisfaction within one year from date of purchase, RETURN IT TO TH

INSTALLING THE REAR RAIL • Position rail so that the right hand edge extends A'_ WARNING: Front and rear rails must be carefully aligned to reduce the risk of kickback, which can cause serious injury. • From the carton, remove the rear rail and the following hardware: Right and left end caps for rear rail 2 screws (5/32-32 x 1/2 in.) for end caps Note: The square head bolts, washers, and hex nuts shown at the top of figure 3 should still be on the table saw. If you mistakenly removed them, put t

315.228310, 315.228410, 315.228510, 113.299310, 113.299410, 113.299510 Item No. _929993 TABLE SAWNOTINCLUDED Save this manual for future reference. • SAFETY _, CAUTION: Read and follow all Safety Rules and Operating • LOOSE PARTS Instructions before first use of • PREPARATION this product. • INSTALLATION • ALIGNMENT Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: 972000-662 3-99 READ ALL INSTRUCTIONS • ALWAYS WEAR SAFETY GLAS

It means attention.q! Your safety is involved. These included parts make up the the fence and rails accessory 9P9993. Fasteners are shown actual size. 1. Fence Rails 2. A, Fence ............................................................. 1 A. Front rail end cap ........................................... 2 B. Screw (1/4-20 x 3/8) ...................................... 2 B. Screw for end caps (5/32-32 x 1/2 in.) ........... 4 C. Fine Adjustment Knob ................................... 1 C, Rear

SCALE FRONTRAIL HEIGHT HANDWHEEL SQUAREHEAD RAILSLOT HEXNUT SWITCHSLOT Fig. 7 TABLETOP VIEWEDFROMABOVE TABLE SAWTABLE EXTENSION SCALE \. FRONTRAIL 7-1/8 in, MARKRIGHTSCALE Fig. 8 HEXNUT FLATWASHER Fig. 6 • Insert the two remaining pan head screws into holes in the fine adjustment knob bracket. • Attach the fine adjustment knob bracket to the bottom of the fence head on the right or the left side of the fence handle. Securely tighten the two screws. BRACKET SCREWS __ Fig. 9 MOUNTING THE SWITCH •

_I, WARNING: Place the switch out of the immediate work area to avoid accidentally turning it off during operation. • Slide the switch assembly to a convenient position, leaving ample clearance for the handwheel. Tighten securely with a screwdriver. • Attach the front rail end caps and screws with a phillips screw driver. See Figure 11. FRONTRAIL \ P TABLE EXTENSION SWITCHSCREW SWITCH ASSEMBLY Fig. 10 ENDCAP SCREW Fig. 11 ALIGNING THE RIP FENCE AND FRONT RAIL The rip fence scale indicator is ins

Push down on the rip fence handle to lock the rip • fence in place. TO INSTALL INDICATOR ON LEFT SIDE REARRAIL HOOKOVER REARRAIL HERE Fig. 12 RIP FENCEHANDLE Fig. 13 CHECKING RIP FENCE AND. BLADE ALIGNMENT The rip fence is self-aligning but should be checked before first use. _. WARNING: Failure to align the rip fence to the blade can cause jams and kickback, resulting in serious personal injury. • Slide the rip fence to the miter gauge groove, which is parallel to blade. Do not lock the rip fen

Following this rule will reduce the risk of sedous personal injury. 9. SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct others who may use this tool. If someone borrows this tool, make sure they have these instructions also. 6 ADDITIONAL SPECIFIC SAFETY RULES cont. /_, WARNING: Some dust particles created by power sanding, sawing, grinding, drilling and other construction jobs contain chemicals known to cause cancer, birth defects or other reproductive harm. Some exampl

® CAUTION: Before using this Cutting Tool, read this manual and follow all its Safety Rules and Operating Instructions. Sears, Roebuck and Co., Hoffman Part, No, 183172530001 Rev. 0 t2/25/02 •. Safety Instructions • Accessories • Assembly • Operation • Maintenance • Parts List • Espanol Estates, IL 60179 USA SECTION PAGE SECTION PAGE Warranty ........................................ 2 Carton Contents .............................. 6, 7 Product Specifications ...................... 2 Know Your Cu