To replicate the Adaptec Storage Manager Enterprise view tree and notification list, do the following: 1. Install Adaptec Storage Manager on one server. 2. Start Adaptec Storage Manager. Using the 'Add remote system' action, define the servers for your tree. 3. Open the Notification Manager. Using the 'Add system' action, define the notification list. 4. Exit Adaptec Storage Manager. 5. Copy the following files onto a diskette from the directory where the Adaptec Storage Manager is installed: RaidMSys.ser --> to replicate the tree RaidNLst.ser --> to replicate the notification list RaidSMTP.ser --> to replicate the SMTP e-mail notification list RaidJob.ser --> to replicate the jobs in the Task Scheduler 6. Install Adaptec Storage Manager on the other servers. 7. Copy the files from the diskette into the directory where Adaptec Storage Manager is installed on the other servers. 2.4 Linux Setup Notes -Because the RPM for Red Hat Enterprise Linux 5 is unsigned, the installer reports that the package is "Unsigned, Malicious Software". Ignore the message and continue the installation. -To run Adaptec Storage Manager under Red Hat Enterprise Linux for x64, the Standard installation with "Compatibility Arch Support" is required. -To install Adaptec Storage Manager on Red Hat Enterprise Linux, you must install two packages from the Red Hat installation CD: o compat-libstdc++-7.3-2.96.122.i386.rpm o compat-libstdc++--devel-7.3-2.96.122.i386.rpm NOTE: The version string in the file name may be different than above. Be sure to check the version string on the Red Hat CD. For example, type: rpm --install /mnt/compat-libstdc++-7.3-2.96.122.i386.rpm where mnt is the mount point of the CD-ROM drive. -To install Adaptec Storage Manager on Red Hat Enterprise Linux 4, Page 3 readme.txt you must install the following package from the Red Hat installation CD: o xorg-x11-deprecated-libs-6.8.1-23.i386.rpm NOTE: The version string in the file name may be different than above. Be sure to check the version string on the Red Hat CD. -To install Adaptec Storage Manager on Red Hat Enterprise Linux 5, you must install one of these packages from the Red Hat installation CD: o libXp-1.0.0-8.i386.rpm (32-Bit) o libXp-1.0.0-8.x86.rpm (64-Bit) -To install Adaptec Storage Manager on Novell Linux Desktop 9 Service Pack 1 for 64-bit systems, you must install two packages from the Novell Linux installation CD: -liblcms-devel-1.12-55.2.x86_64.rpm -compat-32bit-9-200502081830.x86_64.rpm NOTE: The version string in the file name may be different than above. Be sure to check the version string on the Novell Linux CD. -To enable ASM's hard drive firmware update feature on RHEL 64-bit systems, you must ensure that the "sg" module is loaded in the kernel. To load the module manually (if it is not loaded already), use the command "modprobe...

Questo manuale è adatto anche per i modelli :
Altri componenti - Adaptec RAID 5805 (21.34 kb)
Altri componenti - Adaptec RAID 5445Z (21.34 kb)
Altri componenti - Adaptec RAID 5445 (21.34 kb)
Altri componenti - Adaptec RAID 5405Z (21.34 kb)