|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
2 Allow the projector at least 30 mins to cool down. 3 Disconnect the power cord. 4 Find the "OPEN" button on side of the projector and push it to open the cover. (Illustration #1) 5 Open the cover. (Illustration #2) 6 Remove the two screws that secure the lamp module.(Illustration #3) 7 Pull out the lamp module by force. (Illustration #4) To replace the lamp module, reverse the previous step. Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped. LAMP TEMP MENU ENTER SOURCE BACK 1 2 3 4 44 English Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling. 2 Secure the ceiling rod using the appropriate type of four-cylinder screws. 20 mm 13 mm 8.4 mm 130 mm 49.9 mm Short Rod Ceiling Mount Base - Attach to ceiling Screw Type A 50 mm length / 8 mm diameter - Long Rod Extension Rod Long Cylinder Cap Tightening Screw Medium Rod Allen Key - For tightening/loosening 45 English 3 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary. 4 Attach the ceiling bracket to the ceiling rod. - Smaller Washer Projector Bracket Large Washer Supports projector and allows for adjustments Screw Type B Spacer - For heat dissipation - Screw Type A 50 mm length/ 8 mm diameter Large cylinder cap Allen Key - For tightening/loosening Tightening Screw En gl ish 46 5 Adjust the angle and positioning as necessary. Tightening Screw Allen Key Allen Key Tightening Screw Note: The appropriate type of screw and washer for each model is listed in the table below. 4 mm diameter screws are enclosed in the screw pack. Screw Type B Washer Type Diameter (mm) Length (mm) Large Small 4 25 V V SCREW SPEC. M4 x 25 mm ..140.00mm 82.52mm 47 Specifications The specifications listed below are subject to change without notice. For final specs, please refer to Acer's published marketing specifications. Projection system DLP® Resolution • P7305W/F125/PF-W07 series: True 1280x800 WXGA resolution • P7505/F155/PF-807/H9505BD/E255D/HE-822J series: True 1920x1080 1080p resolution • P7605/F165/PF-WU07 series: True 1920x1200 WUXGA resolution Maximum: UXGA (1600 x 1200), WSXGA+ (1680x1050), 1080p (1920x1080), WUXGA-RB (1920 x 1200) Computer compatibility IBM PC and compatibles, Apple Macintosh, iMac and VESA standards: SXGA, XGA, VGA, SVGA, SXGA+, WXGA, WXGA+, WSXGA+ Video compatibility NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/ K/K1/L), HDTV (720p, 1080i/p), EDTV (480p, 576p), SDTV (480i, 576i) Aspect ratio Full, 4:3, 16:9, L.Box Displayable colors 1.07 billion colors Projection lens F = 2.45 ~ 2.9, f = 22.18mm ~ 33.27mm, 1:1.5 Manual Zoom and Manual Focus Projection screen size (diagonal) • P7305W/F125/PF-W07 series: 29" (74 cm) ~ 300" (762 cm) • P7505/F155/PF-807/H9505BD/E255D/HE-822J series: 30" (76cm) ~ 300" (762cm) • P7605/F165/PF-WU07: 31" (78cm) ~ 300" (762cm) Projection distance • P7305W/F125/PF-W07 series: 4.9' (1.5 m) ~ 33.3' (10.1 m) • P7505/F155/PF-807/H9505BD/E255D/HE-822J series: 4.9' (1.5 m) ~ 32.6' (9.9 m) • P7605/F165/PF-WU07 series: 4.9' (1.5m) ~ 31.7' (9.7m) Throw ratio • P7305W/F125/PF-W07 series: 59"@2m (1.57 ~ 2.39:1) • P7505/F155/PF-807/H9505BD/E255D/HE-822J series: 60"@2m (1.49 ~ 2.28:1) • P7605/F165/PF-WU07 series: 62"@2m (1.49 ~ 2.28:1) Horizontal scan rate 15k ~ 100kHz Vertical refresh scan rate 24 ~ 120 Hz English English 48 Lamp type • P7505/F155/PF-807/P7605/F165/PF-WU07/P7305W/ F125/PF-W07 series: 370 W user-replaceable lamp • H9505BD/E255D/HE-822J series: 280 W user-replaceable lamp Keystone correction +/- 40 degrees Audio Internal speaker with 3 W x 2 output Weight 7.5 kg (16.5 Ibs.) Dimensions (W x D x H) 398 mm x 310 mm x 140 mm (15.7" x 12.2" x 5.5") Digital Zoom 2x Power supply AC input 100 - 240 V, 50 - 60 Hz Power consumption • P7505/F155/PF-807/P7605/F165/PF-WU07/P7305W/ F125/PF-W07 series: Normal mode: 460W ± 10% @ 110VAC ECO mode: 350W ± 10% @ 110VAC Standby mode < 0.5W • H9505BD/E255D/HE-822J series: Normal mode: 337W ± 10% @ 110VAC ECO mode: 290W ± 10% @ 110VAC Standby mode < 0.5W Operating temperature 0.C to 40.C / 32.F to 104.F I/O connectors • Power socket x1 • VGA input x2 • Composite input x1 • S-Video x1 • VGA output x1 • HDMI x3 • RS232 x1: 9-pin male connector for projector remote control • Mini USBx1: for firmware upgrade • USB A x2 • 3.5 mm audio jack input x2 • 3.5 mm audio jack output x1 • SPDIF RCA jack output x1 • 3 RCA Component video x1 • 3.5 mm jack input x1: for wired IR remote control • RJ45 x1 • DC J...
Questo manuale è adatto anche per i modelli :Proiettori - P7505 (3.51 mb)
Proiettori - P7605 (3.51 mb)
Proiettori - P7305W (3.51 mb)