Please note, this product is not intended to be a carpet cleaner, only a carpet freshener. DO NOT leave the mop in one stationary position. IMPORTANT ALWAYS vacuum carpet thoroughly before using the steam mop. DO NOT use without the following: • The carpet glider under the mop head • Micro-fiber cleaning pad attached to the mop head • Water in the water tank. ALWAYS insure that the unit is “UNPLUGGED” from the electrical socket prior to filling with water and attaching the micro-fiber cle

The included Waranty Registration Card must be filled out and returned within 10 daysof purchase. This is essential for your Waranty to be effective should any problem arise with this product. Should any defect covered by the terms of the limited waranty be discovered within one year, EURO- PRO Operating LLC wil repair or replace any defective part provided the unit is returned by the original purchaser, freight prepaid, to: US: EURO- PRO Operating LLC, 21 Lawrence Paquette Industrial Drive, Cha

Use the system only for its intended use. 2. DO NOT use outdoors. 3. DO NOT leave the appliance unattended when plugged in. Always unplug the power cord from the electrical outlet when not in use and before servicing. 4. DO NOT allow the appliance to be used as a toy. Close attention is necessary when used by or near children, pets or plants. 5. Use only as described in this manual. 6. Use only manufacturer’s recommended accessories. 7. DO NOT operate the appliance with a damaged plug or cord, o

This is because we test all our steam mops 100% before you buy them, so you get a quality Shark® Light & Easy™ Steam Mop. ef fig. 1 fig. 2 a Upper Handle Tube with Backsaver ASSEMBLY 3 Insert the assembled handle piece IMPORTANT: Never use the Light & benefit 1 Remove all the parts from the into the steam mop base. Push the Easy™ Steam Mop without attaching package. Verify all the listed parts tube base together until you hear a a micro-fiber cleaning pad to avoid b Lower Tube are included. clic

Fill the flask with water and use the funnel to pour it into the tank. Keep the water level under the “MAX” fill line. (fig. 3) 3 Replace the water tank cap and turn it clockwise to the locked position. S3250W_11-S3250W3_11_IB_ENG_100930.indd 5 10-09-30 10:28 AM Using Your Light & Easy™ Steam Mop When you use your steam mop for the first time or if you have not used the unit in awhile, it may take a minute or two for the water to travel through the pump and into the heater to create steam. Get i

Push the handle toward the mop head in a pumping motion. Customize steam output by slow or fast mopping with a forward and backward motion. (fig. 4) BACKSAVER 5 Use the Shark® Light & Easy™ with backsaver benefit to access tight areas. Press the release button on the handle to lock the Light & Easy™ Steam Mop in the backsaver position. Press the release button on the handle again to straighten the handle. (fig. 5) TECHNICAL SPECIFICATIONS Voltage: 120V., 60Hz. Power: 1550 Watts Water Capacity: 2

Chemicals or cleaning solutions may be unsafe or cause damage. IMPORTANT: Please wait 3-5 minutes for your Light & Easy™ Steam Mop to cool off before removing the micro- fiber pad. Getting Started Replacement micro-fiber pads are available at or by calling 1-800-798-7398. Your micro-fiber cleaning pads should be replaced every 3 months to maximize cleaning performance. fig. 1 4 TOLL FREE: 1 800 798 7398 ATTACHING THE MICRO-FIBER PAD 1 Place the micro-fiber cleaning pad on the floor with the quic

sharkcompany.com COPYRIGHT © EURO-PRO OPERATING LLC 2008 IMPORTANT SAFETY INSTRUCTIONS When using your SHARK Steam Mop, basic safety precautions should always be observed, including the following: Warning: To reduce the risk of fire, electrical shock, or injury: 1. Read all instructions before using your steam mop. 2. Use the system only for its intended use. 3. Do not use outdoors. 4. Do not leave the appliance unattended when plugged in. Always unplug the power cord from the electrical outlet

7. When the water tank is empty, the steam mop will stop emitting steam. Unplug the power cord from the electrical outlet and refill the water tank following the instructions above. 8. When you have finished using the steam mop, unplug the unit from the electrical outlet and carefully remove the micro-fiber cleaning pad from the mop head. Please note that the micro- fiber cleaning pad gets very hot with the steam. Always use caution when removing. 9. Never leave the micro-fiber cleaning pad on t

Do not put any objects into openings. Do not use with any opening blocked. 15. Do not put hands or feet under the Steam Mop. Unit gets very hot. 16. Use ONLY on flat, horizontal surfaces. Do not use on walls, counters or windows. 17. Do not add cleaning solutions, scented perfumes, oils or any other chemicals to the water used in this appliance as this may damage the unit or make it unsafe for use. Use regular tap water or distilled/purified water if the tap water in your area is very hard. 18.