No. Part No. Price Description ( ) - No. Required Per Assembly 1 371-2075 $5.00 Hopper - Complete with Agitator, axle and bearings 305-1387 .20 Bearings in Hopper 2 710-192 .20* 10-24 x 3/8” Lg. Truss Hd. Mach. Sew. (8) 3 712-425 .20* 10-24 Square Nut (14) 4 714-507 .20* 3/32 x 3/4 Lg. Cotter Pin (2) 5 503-4009 2.30 Drive Wheel with tire 6 710-473 .20* 10-24 xVi Lg. Truss Hd. Mach. Sew. (2) 7 310-2080 .90 Shutter Bar 8 716-508 .20 Clevis Clip 9 310-2083 .80 Control Rod 10 503-4006 2.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GC720r Edger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .LE720r Hedge Trimmer . . . . . . . . . . . . . . . . . . . . . . . . . .HS720r Straight Shaft Trimmer . . . . . . . . . . . . . . . . . . . .SS725r Turbo Blower . . . . . . . . . . . . . . . . . . . . . . . . . . . .TB720r Pole Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TBPS Prior to operation, WARNING: read and understand the operator

Use common sense. Do not operate the chain saw when you are tired. Keep all parts of your body away from the saw chain when the motor is operating. Before you start the saw, make sure the saw chain is not contacting anything. • Disconnect the chain saw when not in use, before servicing, and when changing accessories and attachments such as saw chain and guard. • Check damaged parts. Before further use of the chain saw, a guard or other part that is damaged should be carefully checked to determin

Vibration is a sign of trouble. Inspect thoroughly for loose nuts, bolts or damage before continuing. Repair or replace affected parts as necessary. AFTER USE • Clean cutting blades with a household cleaner to remove any gum buildup. Oil the blade with machine oil to prevent rust. • Lock up and store the cutting blade in an appropriate area to protect the blade from unauthorized use or damage. SAVE THESE INSTRUCTIONS 4 RULES FOR SAFE OPERATION SAFETY AND INTERNATIONAL SYMBOLS This operator's man

This modern outdoor power tool will provide many hours of useful service. You will find it to be a great labor-saving device. This operator’s manual provides you with easy-tounderstand operating instructions. Read the whole manual and follow all the instructions to keep your new outdoor power tool in top operating condition. PRODUCT REFERENCES, ILLUSTRATIONS AND SPECIFICATIONS All information, illustrations and specifications in this manual are based on the latest product information available a

2-4 216-340-000................................... 6-9 216-390-000................................... 10- 13 MTD PRODUCTS INC • P.O. BOX 368022 • CLEVELAND, OHIO 44136-9722 FORM NO. 770-96-6A Model 035 6A — Page 2 Model 035 PARTS LIST FOR MODEL 035 TILLER JEF. NO. PART NO. CODE DESCRIPTION REF. NO. PART NO. CODE DESCRIPTION 1 710-1167 Tap Scr. #10-16 x 1/2" Lg. 40 756-0996 N Pulley-Chain Case 2 720-0263 Rubber Bumper 45 756-0199 Flat Idler Pulley 3 731-0473 Vinyl Grip 47 712-0116

NO. PART NO. CODE DESCRIPTION REF. NO. PART NO. CODE DESCRIPTION 1 710-0874 Hex Bolt 5/16-18 x 1.25" Lg. 31 736-0140 FI-Wash. .385" I.D. x .62" O.D. 2 712-3004A Hex Flange L-Nut 5/16-18 Thd. 32 720-0270 Grip-Reverse Lever (Gr. 5) 33 686-0014 Reverse Handle Ass’y. 3 786-0004 Tail Piece Brkt. (R.H.) 34 726-0135 Cap Speed Nut 4 786-0003 Tail Piece Brkt. (L.H.) 35 731-1645 Clutch Handle Holder 5 710-0442 Hex Bolt 5/16-18x1.5" Lg. 36 720-0269 Grip-Clutch 7 750-0890 Spacer .32" I

NO. PART NO. CODE DESCRIPTION REF. NO. PART NO. CODE DESCRIPTION 1 710-0874 Hex Bolt 5/16-18 x 1.25" Lg. 28 712-0287 Hex Nut 1/4-20 Thd. 2 712-3004A Hex Flange L-Nut 5/16-18 Thd. 29 720-0268 Grip—Handle (Gr. 5) 31 736-0140 FI-Wash. .385" I.D. x .62" O.D. 3 786-0004 Tail Piece Brkt. (R.H.) 35 731-1645 Clutch Handle Holder 4 786-0003 Tail Piece Brkt. (L.H.) 36 720-0269 Grip—Clutch 5 710-0442 Hex Bolt 5/16-18 x 1.5" Lg. 38 686-0083 N Clutch Handle Ass’y. 7 750-0890 Spacer .32"

Hold in position with cap screws (61). Mount throttle control on under side of handle. Position on upper cap screw and fasten with locknut (35). Do not tighten. Fasten control cable to handle with cable clip (67). Attach hooked end of upper control rod (19) to control pivot lever (15) from left side. Put control handle assembly (6) in “Forward” position. Attach adjustment tube to control rod. Assemble to control handle with cap screw (112) and stop nut (113). Be sure “F-N-R” can be read from ope

. . Parts and service should be handled by your nearest authorized service firm or> recommended by your dealer. Request for parts and ser-vice received at the factory will be forwarded to the appropriate Central Service Distributor in your area for handling. i PARTS LIST FOR MODELS HO. 217-200 AND 217-250 Part lllus. DESCRIPTION Part lllus. DESCRIPTION No. No. ( ) - No. Req’d Per Ass'y No. No. ( ) - No. Req’d Per Ass’y 1 321-4107 Mounting Plate Assembly 60 710-765 Set Screw-Alien 5/16—24 x