4 FBR-1100TX ..................................................................................................................................... 4 FBR-1400TX ..................................................................................................................................... 8 FBR-1401TX ...................................................................................................................................10 FBR-1700TX ................................................

Check the LEDs • When the LevelOne Broadband Router is powered On, the Data/Status LED should flash Orange, then turn Green. If it stays Orange, or flashes Orange/Green, there is a hardware problem. • The WAN Data LED (on the top) should be ON. • The LAN Link LED (beside the LAN connection) should be ON. • The WAN Link LED (beside the WAN connection) should be ON. For more information, refer to LEDs - FBR-1100TX in Chapter 1. Installation Procedure -FBR-1400TX Figure 7: Installation Diagram 1. C

• If the printer attached to the LevelOne Broadband Router is changed, just run this program again, and select the correct printer. • To delete a port created by this setup program, use the Windows Delete Port facility: • Right-click any printer in the Printers folder, and select Properties. • Locate the Delete Port button. This button is on the Details or Ports tab, depending on your version or Windows. • If the LevelOne Broadband Router's IP Address is changed, and you can no longer print, del

Disable All This will cause the "Enable" setting of all Virtual Servers to be set OFF. Add Add a new entry to the Virtual Server list, using the data shown in the "Properties" area on screen. The entry selected in the list is ignored, and has no effect. Update Update the current Virtual Server entry, using the data shown in the "Properties" area on screen. Delete Delete the current Virtual Server entry. Note that the pre-defined Servers can not be deleted. Only Servers you have defined yourself