Align the fabric edge with the seam guide marking on the needle plate and begin sewing [Fig. 1]. Take a few stitches in reverse (backstitch) to secure the seam. Continue stitching forward at a consistent speed, while guiding the fabric along the seam guide marking. Backstitch at the end of the seam [Fig. 2]. Use a shorter stitch length (2-3) when patchwork piecing [Fig. 3] or sewing sheer fabrics. Use a longer stitch (3.5-4) when sewing heavy, thick, or napped fabrics such as denim, polar fleece

The sewing machine should never be left unattended when plugged in. 2. Always unplug this sewing machine from the electrical outlet immediately after using and before cleaning. 3. Always unplug before changing the light bulb. Replace bulb with same type rated 15 watts. WARNING- To reduce the risk of burns, fire, electric shock, or injury to persons: 1. Do not allow this machine to be used as a toy. Close attention is necessary when the sewing machine is used by or near children. 2. Use this sewi

Do not discard any packing materials without prior scrutiny as to contents. Clean from machine all greases, dirt or dust. Pay particular attention to area around the looper mechanism and looper. 2. Setting-up Machine Assemble knee lifter lever to machine and place on sewing table so that lever is 13m/m distant from front edge of the table. Line up belt groove in belt pulley of handwheel with belt groove of drive mechanism (motor or clutch). Mark three screw hokes for fastening machine to sew

Main specifications 1 3. Machine installation and operation preparation 1 1. Machine installation 1-3 2. Operation preparation and notice before running 3-4 4. Machine operation 5-6 1. Coordination among needle, thread and materials 5 2. Install the needle 5 3. Winding the bobbin thread 5-6 5. Machine adjustment 6-9 1. Adjust the needle thread tension and bobbin thread tension 6-7 2. Adjust the pressure of presser foot 7 3. Adjust the safety clutch device 7-9 1. MSK-8420BL-18 machine casting com

Remark 44 1WF1-010A Thread tension fixing bracket assembly 1 45 1WF1-010B Thread guide bracket 2 46 1WF1-010C Thread guide plate 2 47 1WF1-010D Spring 2 48 1WF1-010E Thread guide b acket screw assembly r 2 49 1WF1-010M Thread releasing pin (short) 1 50 1WF1-010H Thread tension nut 3 51 1WF1-010G Thread tension spring 2 52 1WF1-010S Thread releasing disc 2 53 1WF1-010F Thread tension disc 4 54 1WF1-010R Screw 1 55 1WF1-010Q Screw 2 56 1WF1-010J Thread controlling disc assembly 2 57 1WF1-026 Screw

Main specifications 1 3. Installation and preparation 1 3.1 Installation1 3.1.1 Location of the machine1 3.1.2 Installing oil reservoir1 3.1.3 Mounting machine head1 3.1.4 Mounting knee lifter2 3.1.5 Installing the motor2 3.1.6 Connecting the clutch lever to the pedal3 3.1.7 Installing the thread winder3 3.1.8 Installing the thread spool stand 3 3.2 Preparation3 3.2.1 Cleaning the machine3 3.2.2 Examination4 3.2.3 Precaution before start 4 4. Operation 5 4.1 Coordination between needle thread an

3]. 4. Snap the thread into the first thread guide at the top of the machine [Fig. 4]. 5. Bring the thread down between the tension discs [Fig. 5]. 6. Bring the thread down the right slot of the threading path, then across to and up the left slot [Fig. 6]. 7. Bring the thread through the take-up lever from right to left [Fig. 7], making sure the thread falls into the take-up lever slot [Fig. 8]. 8. Bring the thread back down the left slot of the threading path [Fig. 9] and into the thread guide

NO. 173209 UNLSSS OTHERWISE NOTED. ADD 3 5 OT. SAE 10w 30 OIL TO ENGINE CRANKCASE CKfcLK ENGINE SP6ED. 3850 ± 100 RPM HIGH IDLE NO LOAD 1200 * 100 RPM LO IDLE NO LOAD. 2fl Mfg. No. 1690230 & 1690283 Engine, Front Clutch & Fuel Group Ref. Part Nc. No. Qty. Serial No. Description t 1 (DOOOOM > ENGINE. 19-1/2 HP 2 916608 3 (OOOOOM 1 ÇAPSÇREW. No*. 7/16-14 * 1-1/2 3 918430 3 {OOOOOM ) WASHER. Plein. 7/16 4 918199 3 [OOOOOM ) LOCK WASHER. 7/16 5 915213 3 (OOOOOM 1 NUT. Hex. 7/16-14 6 92

It produces a soft seam, even at high speeds. It's ideally suited for light to medium weight fabric, both knits and woven goods. BEST USED FOR Ladies men's and children's wear General serging applications Woven and knit fabric Light to medium weight fabrics FEATURES • Differential feed • Stitch length regulator • Fully automatic lubrication • 6,500 rpm • Complete stand includes a Sewquiet™ 4000 DC Servomotor, plywood semi-submerged table top and K-legs OPTIONS überlight sewing light F

It produces a soft seam, even at high speeds. The MSK-3316N-GG7-40H is suited for light to medium weight fabric, both knits and woven goods. BEST USED FOR Ladies men's and children's wear General serging applications Woven and knit fabric Light to mediumweight fabrics FEATURES • Differential feed • Stitch length regulator • Fully automatic lubrication • 6,000 rpm • Complete stand includes a Sewquiet™ 4000 DC Servomotor, fully-submerged plywood table top and K-legs OPTIONS überlight se