valutazioni - 2, GPA: 3.5
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
The IP Settings screen appears. 8. Select IP Mode, and then set the IP Mode to Manual. 9. Go to the IP Address entry field, and then select the IP Address using the remote. 10. Enter the first portion of the IP Address (for example, 105) into the first entry field using your remote. When done, go to the next field. 11. Enter the next portion of the IP Address. When done, go to the next field. 12. Repeat the entry process for each field in the IP Address. N If you make a mistake when entering a number, re-enter the number to correct it. 13. When done, go to the Subnet Mask fields. 14. Repeat the same entry process for Subnet Mask, Gateway, and DNS Server. 15. When done, select OK. The network connection screen appears and the verification process starts. When the connection has been verified, the "You are connected to the Internet. If you have any problems using online services, please contact your Internet service provider." message appears. services, please contact your Internet service provider." message appears. WPS(PBC) Network Setup If your router has a WPS(PBC) button, you can configure your TV's wireless network connection using the WPS(PBC) button quickly and easily. To set up your TV's wireless network connection using WPS(PBC), follow these steps: 1. Go to Network Settings screen. (Network > Network Settings) 2. Select Start. The network function searches for available wireless networks. When done, it displays a list of the available networks. 3. Select the WPS(PBC). 4. Press the WPS(PBC) button on your router within 2 minutes. Your TV automatically acquires all the network setting values it needs and connects to your network. 5. The network connection screen appears, and network setup is done. Plug & Access Network Setup The Plug & Access function lets you easily connect your Samsung TV to your Samsung wireless router (sold separately) by using a USB memory stick to transfer the setup information from the router to the TV. If your non-Samsung wireless router does not support Plug & Access, you must connect using one of the other methods. N You can check for equipment that supports Plug & Access on samsung.com. To set up your TV's wireless network connection using Plug & Access, follow these steps: 1. Turn on the Samsung wireless router and your TV. 2. Insert a USB memory stick into the USB port in your Samsung wireless router. Check the router’s LED’s to make sure it is on (Blinking > on). 3. Take the USB memory stick out of the router, and then insert it into a USB port on your Samsung TV. The memory stick downloads the connection information. 4. Wait until the connection is automatically established. N If Plug & Access does not connect your TV to your wireless router, a popup screen appears on the screen notifying you of the failure. If you want to try using Plug & Access again, disconnect the USB memory stick, reset the router, and then try again from Step 1. You can also choose one of the other connection setup methods. then t...
Questo manuale è adatto anche per i modelli :TV - UA32EH4030W (2.17 mb)
TV - UA32EH4500W (2.17 mb)
TV - UA32EH4530W (2.17 mb)
TV - UA32EH5300W (2.17 mb)